Megadyne is a designer and manufacturer of power transmission belts.

One stainless ring can be re-screened up to 18 times, and shipping rings in bulk keeps freight costs down while cutting landfill waste.

Compressed air can account for up to a third of a plant’s electricity, and drying and blow-off is often the easiest place to cut it. Learn the ladder from open pipe to blower,...

The 100-kVA transformer meets high-voltage isolation requirements without potting its primary coil, which Sumida says could simplify production of SST magnetics.

Elliott Tool Technologies is a manufacturer of tube tools and burnishing tools.

ACT-ion's Carrollton plant makes U.S.-made lithium-ion cathode material with a continuous process that can run on recycled black mass.

New capacity for oil-free compressors, dry vacuum pumps, and turbomachinery aims to shorten lead times for U.S. industrial and chip customers.

Simplify conveyor design with the ATV350 on-machine drive, built to reduce wiring and cabinet complexity, speed installation and commissioning, and enable faster recovery when...

Arrow Construction uses Caldwell's Dura-Mod to reconfigure one beam for each lift, with parts a single worker can assemble and haul in a small truck.

Kardex’s BinInductAI checks bin walls, pickup holes, and barcodes automatically, cutting manual pre-checks during AutoStore go-live.

Teknic's ClearPath-EC NEMA 17 servos update position, velocity, and torque every 0.25 ms and synchronize hundreds of axes within 1 µs.

See the new machines and technologies from PACK EXPO 2026, from a plug-and-play robotic palletizer to AI-powered X-ray inspection software.

Yaskawa’s PackMaster pairs vision and motion planning to palletize 800 to 1,200 mixed-SKU cases per hour.

Crown’s C-G Series LPG cushion tire forklifts use sealed, oil-cooled disc brakes to keep dirt and water out of internal components.

Antaira’s LanoSync Q-Series switches restore ring traffic in under 50 ms after a link or node failure through G.8032 ERPS.

Bailey’s electronics division, which makes joysticks and controls for mobile equipment, is now under one roof and looking for OEM test partners.

Kanthal’s Flow Heater Generation 3 delivers ±1.8°F (±1°C) temperature accuracy for continuous and cyclic gas heating processes.

IDEC’s AE-Stop assisted emergency stop switch latches by hand or by solenoid, resetting only manually at the switch.

For bulk handling plants, tight pulley spacing and poor access can make belt cleaners hard to maintain, driving up spillage and cleanup costs.

Trumpf’s TruLaser Weld 3000 robotic laser welding cell uses welding optics about 40% smaller to reach inside deep housings and boxes.