SV-45 Vertical Honing Machine Handles Taller, Deeper Workpieces

Sunnen’s SV-45 Vertical Honing Machine holds a constant crosshatch angle from the top to the bottom of the bore.

Shops honing longer bores in taller, deeper components often have to step up to a larger honing system. Sunnen's SV-45 Vertical Honing Machine uses an extended column to add 17.5 in. (445 mm) of stroke over the SV-35,  giving manufacturers the reach for longer-bore work without moving to a bigger machine.

Applications

  • Bore honing and sizing
  • Crosshatch finishing
  • Bore taper removal
  • Engine block oversize honing

Industries

  • Engine rebuilding

Who It's For

  • Long-bore work without a larger honing system
  • Roughing and finishing without stone changes
  • Unattended dwell cycles
  • Lower-automation needs (manual X-axis model)

Features:

  • Stroke travel: up to 45 in. (1,143 mm)
  • Stroke speed: 5 to 100 SPM
  • Spindle speed: 50 to 600 rpm
  • Spindle motor: 4.6 hp (3.4 kW) servo
  • Stroker: 4.7 hp (3.5 kW) servo ball screw
  • X-axis travel: 32 in. (813 mm)
  • Max workpiece and fixture weight: 1,325 lb (600 kg)
  • Work envelope: 48 x 30 in. (1,219 x 760 mm)
  • Honing oil reservoir: 75 gal (284 L) with two canister filters
  • Electrical: 400V AC, 50 Hz or 460V AC, 60 Hz, three-phase
  • Machine weight: 2,930 lb (1,329 kg) dry, 4,020 lb (1,823 kg) shipping
  • Models: SV-45 with manual X-axis; SV-45X with servo X-axis and tool driveshaft gripper (no step-and-repeat function)
  • Beckhoff industrial controls with Windows-based Sunnen2 software
  • 15.6 in. (396 mm) color touchscreen on a swiveling operator panel
  • Synchronized servo spindle and stroker hold a constant crosshatch angle with no rollover at bore entrances and exits
  • Crosshatch control continuously adjusts spindle and stroker speeds to the entered angle
  • Real-time full bore profile display for locating and removing taper
  • Programmable Auto Dwell at the top, middle, or bottom of the bore
  • Automatic tool protection checks the top and bottom of the bore before each cycle
  • Rough and finish cycles with automatic switchover
  • Servo rotary tool feed runs two-stage hone heads; rough-to-finish changeover four times faster than previous models
  • Spindle drives two-stage metal-bond diamond and CBN abrasives
  • Bore oversize setup for standard engine-rebuild oversizes of 0.01, 0.02, and 0.03 in. (0.25, 0.51, and 0.76 mm)
  • Front-loading design
  • Cast iron column and welded base
  • CE-compliant safety: interlocked sliding front, side, and rear panels; front light curtain; safety PLC; and safe limited setup speeds
  • Uninterruptible power supply for safe control shutdown and startup
  • LED work area lighting
  • Optional OPC UA interface for remote process monitoring
  • Selectable screen languages, including English, German, Spanish, and Chinese
  • 3-year parts and labor warranty

Sunnen Products Company
St. Louis, MO
(800) 325-3670
sunnen.com

Contributors:
This piece was created with the help of generative AI tools and edited by our content team for clarity and accuracy.