EasyZERO runout compensation nuts quickly correct runout errors and misalignment for all-round tools using ER collets. Easy-to-use, innovative replacement nuts feature six adjustment screws that allow for up to 0.01 in. (0.28 mm) runout to be dialed in easily, allowing for more accurate machining, tighter tolerances, and better surface finishes—especially on difficult parts.

Concentric cutting means that all cutting edges equally share the chip load, thus increasing tool life and lowering tool costs. Rapidly dialing in the desired runout with complete control ultimately saves time and increases process capability, due to decreased time tapping and resetting tools and collets.

Features:

• Collet Max Diameter: 0.393 to 0.181 in. (10 to 30 mm)
• Diameter A: 34 to 79 mm
• Hex Key: 2 to 3 mm
• Torque: 35 to 110 ft-lbs (50 to 150 N-m)
• Correction of runout errors and misalignment
• Hold tighter tolerances
• Quick and easy
• Compatible with all ER collet chucks: ER16 to ER40
• Produce better surface finishes
• Improve process capabilities
• Increase tool life
• Lower tooling costs