750 Series Functional Safety I/O Modules Offer Flexible Safe Outputs

WAGO 750 Series I/O modules include programmable internal logic for safety applications up to SIL3/PLe.
Related To: 
Sept. 10, 2025
2 min read
© WAGO
750 Series Functional Safety I/O Modules Offer Flexible Safe Outputs
750 series safety I/O logic modules for use with Wago's PFC controllers.

750 Series Functional Safety I/O Modules from Wago are for use with its PFC controllers, providing four safe inputs and multiple safe output configurations. Modules feature either two safe outputs at 10 A/24V DC or four safe outputs at 2 A/24V DC each. Power outputs can operate in bipolar (high-side/low-side switching) or unipolar (common potential on one side of the load) modes. The modules monitor short circuits, cross circuits, and 24V power supply from separate sources.

Internal logic is programmable using Wago's I/O-CHECK and Safety Editor software, enabling safety-related applications up to SIL3/PLe without requiring a separate safety PLC. The modules have been evaluated by UL according to UL/CSA 61010-1, UL/CSA 61010-2-201, UL 121201, and CSA-C22.2 No. 213 standards.

Features:

  • 4 safe inputs
  • 2 safe outputs at 10 A/24V DC or 4 safe outputs at 2 A/24V DC
  • Bipolar and unipolar output modes
  • Monitors short circuits, cross circuits, and separate 24V power supplies
  • Programmable internal logic via I/O-CHECK and Safety Editor
  • Supports safety applications up to SIL3/PLe
  • UL and CSA evaluated

Wago Corporation
Germantown, WI
(262) 255-6222
[email protected]
wago.com