- Single Workstation Continuous Monitor
Continuously monitors the path-to-ground integrity of an operator and conductive or dissipative worksurface and meets ANSI/ESD S20.20 in accordance with ESD TR1.0-01-01 - Electrical Overstress (EOS) Detection
Alarms if overvoltage (±5V or less) from a tool such as a soldering iron or electric screwdriver is applied to a circuit board under assembly - Operator Body Voltage Detection
Alarms if the operator generates or comes in contact with a voltage that would be dangerous to an ESD susceptible item - Digital Signal Processing Technology
Applies a low test voltage to the operator (0.40V) for the handling of sensitive components - Miniature Size (0.85 H x 2.4 W x 2.6 in. L)
Uses minimal workspace and includes mounting tabs for installation underneath table tops - Use with Dual-Wire Wrist Straps
- Replaceable Dual-Wire Operator Jack
Use the CTA251 Replacement Jack PCB to easily replace the operator jack without the use of solder - Calibration Unit Available for Accurate Performance and Conformity Testing in the Field
- NIST Calibrated with Certificate Included
Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology. - 100-240VAC Power Adapter with Interchangeable Plugs
Works with standard electrical systems in North America, United Kingdom, Japan, Asia, and Europe - Assembled in the United States of America with Globally Sourced Materials
