PMC is pleased to announce the all NEW Flush Mount Transmitter model PT12 Series designed to accurately measure pressure and level in processes where clogging of the diaphragm face is of particular concern. The small 1” diameter transmitter permits installation flush with the inside wall of pipes 2” in diameter and larger tanks for level measurement. This feature eliminates any build-up of solids often encountered with conventional flange mount and recessed diaphragm type pressure transmitters. The PT12 Series incorporates a high precision ceramic capacitive pressure sensor to ensure accuracy and durability. This type of sensor is ideally suited for high wear applications. The process pressure is converted to a standard 2-wire, 4-20 mA output via either a polyurethane cable or micro DIN electrical connection. The PT12 Series is offered as a fixed range transmitter in 7 standard full scale gauge pressure ranges from 0 – 1 to 0 – 150 psi. For intermediate ranges PMC offers the PT10 Series. For installation PMC offers its patented 1” diameter nipple available in either a weld-on or 1/2” NPT screwed-in format. • Full Scale Ranges - 0-5, 0-15, 0-30, 0-60, 0-100 and 0-150 psig • Static Accurac- ± 0.25% of Full Scale Combined non-linearity, hysteresis, and repeatability • Overpressure - 4X for 5 psi range 1.5X for all other ranges • Compensated Temperature Range- -5°F to 175°F (-20°C to 80°C) • Temperature Effects • Thermal Zero Shift: <±0.04%/°F • Thermal Span Shift:<±0.02%/°F • For 5 psi range, Temperature Effects are typically prorated from 15 psi, i.e. 3 x greater • Operating Temperature Range- Ambient: -5°F to 175°F (-20°C to 80°C) • Electrical • Output: 2-wire, 4-20 mA • Supply Voltage: 10-32 VDC • Zero Setting- ± 1% FS • Span Setting- ± 1% FS • Long Term Stability- ± 0.1% Full Scale typical • Electrical Termination • CV/P - 10’ PVC Cable • CV/M - Micro DIN 40050