Pentair Industrial introduces the Aqualine® Liquid Filtration System, a superior, cost-saving solution for high-flow-rate applications including food and beverage, chemical, cosmetics, electronics and other industries. Aqualine features a rugged, 8-inch diameter fiberglass housing that provides extreme durability while costing up to 50% less than stainless steel alternatives, typically saving several thousand dollars. The housing is available in a 60-inch length, with pleated cartridge construction and an outside-in flow pattern that provides maximum flow rates with the lowest possible pressure drop. In addition to its superior performance, Aqualine saves valuable plant floor space with a vertical rack design that allows housings to be stacked, which also increases total flow. With Pentair’s proprietary quick-change design, Aqualine cartridges are simply accessed and replaced within a matter of minutes—with no nuts or bolts involved in the disassembly, saving significant labor costs. An operator can change the cartridge in a 150 GPM Aqualine System in approximately one-fifth the time of a comparable conventional swing bolt system. With optional isolation valving, a single Aqualine element can be replaced while the whole system remains in operation, eliminating costly downtime. Plus, Aqualine cartridges require less frequent filter change-outs. The large diameter and 60-inch cartridge length provides extended filter life, saving additional installation and equipment costs. Aqualine Liquid Filtration System cartridges, available in a 6.75-inch diameter, are manufactured with absolute-rated polypropylene media—defined as Bx greater than 5,000—and contain a PVC core and a proprietary o-ring seal. The cartridges achieve 99.98% (Beta 5000) efficiencies at their stated micron size and are rated ASME Section X Class 1. With this superior construction, paired with a space-saving rack design and a cost-effective price, Aqualine delivers long-lasting performance in a compact, convenient package. • Pressure Rating - 160 psi at 1100 F • Pleated 2.5-inch Diameter by 10-inch Length Cartridges Replaced – 40” • Recommended Water Flow Rates in Gallons per Minute per Cartridge with a 2.5 Micron Cartridge – 300”