Space-Saving Sump Cleaner

May 30, 2018
CECOR's sump cleaners provide a high nozzle velocity that vacuums puddles off the floor.

The SE15 single-phase electric Sump Shark sump cleaner helps maintain machine tool coolant by filtering dirty coolant and making the cleaning process faster and easier.


An important part of coolant maintenance is filtering the metal chips and swarf from the coolant. Chips and sludge at the bottom of the sump can cause microbial growth which leads to smelly coolant and the risk of dermatitis, which is an uncomfortable skin rash. Metal chips circulating through the machine can mar the workpiece and the machine tool.


With suction lifts up to 26 in. Hg (350 in. water), a Sump Shark can suck up an entire sump of metalworking fluid entrained with sludge and metal chips in just minutes (or seconds depending on sump size).  The solids are caught in the onboard filter as the coolant passes into the tank.


The SE15 can be plugged into any standard 110v electric unit, has an overfill protection, and all discharge ports are valved. Units comes complete with hoses, quick-disconnect coupler, suction tools, and filter bags. An optional F23 filter (2.3 cu.ft.) is available for coolant heavy with chips and swarf. A DF4 discharge filter is available for second stage, very fine filtering.

Tank Size:60 gal (227 L)
Transport:PL - Push/lift
Motor:Vacuum Motor-Volts 115-Amps 14.2-Hertz 60-Phase 1
Pump:Rotary, vane-type vacuum pump
Suction Lift:13 in. Hg (Mercury)
Standard Filter:F10 - 1 cu. ft.
Overfill Prevention:Automatic overfill protection
Cleanout Port:2-1/2 in. drain port in bottom
Pressure Discharge:6 PSI with safety backup valve
Wheels:Two 8 x 2 in. phenolic wheels One 6 x 2 in. swivel caster
Hose:1-1/2 in. I.D. x 16 ft oil-resistant PVC suction/discharge hose including quick-disconnect coupler.
Tools:Three suction tools (1) straight, (1) flexible and (1) flared nozzle.
Dimensions:45 L x 36 W x 57 in. H
Shipping Weight:350 lb.