Model 682A09 ICP In-Line 4-20 mA Vibration Transmitter
Model 682A09 ICP In-Line 4-20 mA Vibration Transmitter installs in line with any industrial accelerometer and converts the vibration signal to a 4-20 mA velocity output that can be trended with PLCs, DCSs, or SCADA control room systems. Its sleek design installs right into the cable run; no DIN rails, cabinets, or special power is required. Customers can take their existing accelerometers and turn them into 24/7 vibration monitoring devices for their most critical machinery.
The 682A09 is a stainless steel, hermetically sealed design capable of operating in the harshest environments with a 2-pin MIL connector input and 3-pin MIL connector output. It accepts a 100 mV/g analog signal, converts to 4-20 mA output, and operates off of loop-power supplied by the PLC, DCS, or a SCADA system. In addition, the 682A09 outputs the 100 mV/g analog signals via its 3-pin output connector. The analog signal can be run to a central collection point, allowing the user to maintain the FFT capability of the original system.
Features:
- Input Signal (ICP Accelerometer): 100 mV/g (10.2 mV/(m/s²))
- Frequency Response: 600 to 60,000 CPM (10 to 1000 Hz)
- Measurement Range: 0 to 1 in/s pk (0.0 to 25.4 mm/s pk)
- Output Range: 4 to 20 mA
- Broadband Resolution: 0.01 in/s pk (0.26 mm/s pk)
- Temperature Range: -40 to 185°F (-40 to 85°C)
- Temperature Response: 15%
- Excitation Voltage: 20 to 30V DC
- Electrical Isolation (Case): >100,000,000 Ohm
- Settling Time (within 2% of value): <60 s
- Load Resistance: 50 (Vs-20) Ohm