Explosion Proof LED Light - Non-Spark Aluminum Base - Single 150 Watt Led Light
The EPL-BS-161M-100 Explosion Proof LED Light from Magnalight is rated Class 1 Division 1-2 Groups C & D and Class 2 Division 1-2 and uses a 16 inch LED light head to produce 10,000 lumens of light while drawing only 150 watts.
The EPL-BS-161M-100 explosion proof LED light provides 8,000 square feet of work area coverage with 10,000 lumens of light output. This portable LED light is mounted to a spun aluminum base and has an LED light head measuring 16 inches in diameter. The LED light head on this unit produces a brilliant flood pattern of light that is ideal for illuminating enclosed areas and hazardous locations where flamable vapors, gases and dusts may be present.
| This explosion proof LED light fixture is comprised of a 16 inch LED light head mounted atop a base stand fabricated from non sparking spun aluminum with a convenient carrying handle built into the top of the stand. The lamp can be easily adjusted up or down 90 degrees and locked into position by simply loosening the two hand screws located on either side of the light head and retightening them once the desired angle is found. Included with this LED light tripod is 100 feet of SOOW cord terminating in an 1523 explosion proof straight blade plug. This unit is also multi-voltage capable and can configured to operate on 120-277 volts 50/60 Hz. Further adding to the versatility and convenience of this explosion proof LED light are 25 peel off mylar overspray lamp protectors that ship with the unit. The protectors provide lamp protection from dirt or debris and can be removed, cleaned and replaced, lessening the need for tedious lamp cleaning or replacements. This lamp is T5 temperature rated and the LED light head retains 80% of its lumen output after 60,000 hours of use, far longer than incandescent or fluorescent lamps. |
