MV1000 Medium Voltage AC Drive

Designed for energy savings and improved process control, the MV1000 drive combines compact modular design, high efficiency, low harmonics, and industry leading MTBF into a medium voltage drive solution that is compatible with Yaskawa’s 1000 series low-voltage AC drive products.

 

Yaskawa’s Smart Harmonics Technology reduces input Total Harmonic Distortion (THD) to less than 2.5% without filters which exceeds the requirements of IEEE519-1992 by almost 50%.

Efficiency97% or better (at rated motor speed, 100% load)Power FactorMinimum 0.95 lag (at motor rated speed, 100% Load)HP/Output Voltage Ranges

200 - 2,750 HP @ 2.3 kV
175 - 4,000 HP @ 3.3 kV
300 - 12,000HP @ 4.16 kV
350 - 8,000HP @ 6.6 kV
700 - 16,000HP @ 11 kV

Cooling MethodForced air-cooling fan (with failure detection)Ambient Operating Temperature?5 to +40?C (up to +50?C with output current derate)
95% RH or less (no condensation)Control MethodOpen-loop vector control, Closed loop vector control, V/f control (for multiple motor operation), Closed loop vector control for SM (option)Input Voltage Range2.3 kV -20% to +10%, 60Hz
3.3 kV -20% to +10%, 50/60Hz
4.16 kV -20% to +10%, 60Hz
6.6 kV -20% to +10%, 50/60Hz
11 kV -20% to +10%, 50/60HzInput ConfigurationIntegrated isolating transformer, with multi-pulse secondary using Smart Harmonics™ Technology (less than 2.5% THD, input current)Output ConfigurationEnhanced Cascaded H-Bridge, with two 5-level cells per phase, providing a 9-level output waveform for 4kV ratingsOverload Capacity100% Continuous
110% for 1 minute
120% for 15 SecondsFreq. Control Range0.01 to 120 HzFreq. Control Accuracy±0.5%Analog Input Resolution0.03 HzAccel/Decel Time0.0 to 6000 sSpeed Accuracy± 0.5% (open-loop vector control), ± 0.02% (closed loop vector control)Torque Accuracy±5% (open-loop vector control), ±3% (closed loop vector control)Momentary Power LossMax. 2 Seconds (UPS required for control power)Main Control FunctionsTorque Control, Droop control, Speed/Torque control switch, Momentary Power Loss, Speed Search, Overtorque detection, Toque limit, 17-Step speed (max), Accel/decel time switch, S-Curve accel/decel, 3-wire sequence, Auto-tuning (rotational, stationary), Dwell, Cooling fan on/off, Slip compensation, Torque compensation, Frequency jump, Upper/lower limits for frequency reference, DC Injection braking at start and stop, High slip braking, PID control (with sleep function), Energy Saving control, Modbus communications (RS485, max. 115.2 kbps), Fault retryDigital OperatorStatus display, Fault display, Parameter setting, Parameter referenceProtective FunctionsOvercurrent, Overvoltage, Undervoltage, Output ground fault, Output open-phase, Overload, Cooling-fan error, Transformer overheat, Motor overheat, etc.Communications (optional)Any one of PROFIBUS-DP, DeviceNet, Ethernet, or ModbusTCP/IP can be installedInput TransformerClass H dry type, ?5%/N/+5% tap, secondary multi-phase windingTemperature ProtectionPower cells: protected by thermistor for temperature
Transformer: protected by PT100?Storage Temperature?20 to +60°C (for very short term for shipment and handling)EnclosureNEMA Type 1 (IP40) - 12 GA Sheet Metal construction
Front access for maintenance and component replacement
Paint finish: 5Y7/1 Munsell semi-gloss BeigeApplicable StandardsUL, CSA, NEMA, IEEE, JIS, JEM, JEC