The LHFL LED floodlight is constructed of a low copper content, corrosion resistant housing with a baked on polyester finish. It also features a high impact glass lens, a 360 degree rotational yolk arm mounting, 7 X 5 beam pattern and uses Cree Xlamp XM-L LEDs. The driver also offers 0-10V dimming as a standard feature. Standard CCT is 5,000K with 3,500K and 4,000K options available. It is rated to be used in hazardous environments, marine rated and wet location environments, including IP66 and areas where it could be continually exposure to salt water and temperatures from -20 degrees C to 55 degrees C. The design is also tolerant of environments where hazardous gases (Class I Division 2), dusts (Class II Division 1) and fibers (Class III) are contained. There are equals to 175W, 250W and 400W metal halide lamps offering up to 50% energy savings and zero maintenance for up to 60,000 hours. Like all of our LED products, the LFL is covered by our five year warranty against manufacturers’ defects and lumen loss.