With its MicroMAX JetMachining Center, OMAX proves the speed, versatility and accuracy of abrasive waterjet technology now applies to the cutting of micron-level parts or part features from a wide range of materials, including exotic metals, advanced composites, polymer thermoplastics and glass. Ideal for prototype development and production runs, the MicroMAX is a highly rigid machine with a table size of 2 feet 4 inches by 2 feet 4 inches and an X-Y cutting travel of 2 feet by 2 feet. It utilizes advanced high-precision linear encoders, innovative vibration isolation and intuitive software control systems to achieve a position repeatability of less than 3 microns and a positioning accuracy of approximately 15 microns (0.0006"). The MicroMAX comes equipped with a high precision 7/15 Mini MAXJET5i nozzle that features a 0.007" orifice and 0.015" mixing tube combination for quickly and accurately cutting delicate, complex patterns. Because it forms a jet stream carrying an extremely fine abrasive, the nozzle can produce a kerf as small as 0.015". The machine also has advanced pressure controls for piercing delicate materials. Now, a smaller version of its OMAX Corporation’s award-winning Tilt-A-Jet® cutting head designed specifically for its MicroMAX JetMachining Center is also available. The new Tilt-AJet accessory nearly quadruples the position accuracy of the nozzle enabling the machine to achieve virtually zero taper with most materials up to 3" in thickness. It is also 25 percent smaller and lighter than the Tilt-A-Jet designed for OMAX’s other machine models and is nearly twice as rigid for less deflection. The Tilt-A-Jet for the MicroMAX employs 10 degrees of tilt, and is fully sealed for use in the abrasive waterjet environment.
- cuts micron-level parts
- X-Y cutting travel of 2 feet by 2 feet.