The D1 Wheel Stripper strips magnet, enamel and film insulated wires. Round, rectangular and square section wires with insulation such as Formvar, ML, Dayglass, Isonel, Polythermaleze and many more can be stripped. Either FybRglass® or wire brush wheels may be used. FybRglass® wheels rotate at high speed and generate frictional heat that softens the insulation on the wire and the “nap” of the wheel wipes it away, producing a clean polished surface with no risk of nicking. Wire brushes, recommended for larger wires where a roughened surface aids subsequent soldering, remove insulation by the cutting action of their many bristles. These are more abrasive than FybRglass® wheels and will also remove glass and fabric insulation. The selection of the correct grade of stripping wheel is critical.
- Stripper Type: Twin wheel stripper with length stop
- Wire Size Maximum: 6 AWG or square wire up to 1/4 in. x 1/4 in. (For rectangular wire the maximum wheel opening is 1/4 in. and the maximum material width is 1 in.)
- Wire Size Minimum: 35 AWG
- Regular Stop Strip Length: 5/8-2 1/2 in.
- Mini Stop Strip Length: 3/8-1 3/4 in.
- Power: 120V 60Hz