Time Mark Corporation are manufacturers of 3-Phase monitors, current monitors, voltage sensors, pump and liquid level controls, alternating relays, and Signaline timing devices.
Since 1972, Time Mark has been proudly engineering, manufacturing and assembling our quality products from our manufacturing facility in Tulsa, Oklahoma. Time Mark Corporation are manufacturers of 3-Phase monitors, current monitors, voltage sensors, pump and liquid level controls, alternating relays, and Signaline timing devices.
Time Mark Corporation products are distributed throughout the United States and exported to an expanding international customer base. Standard catalog products are marketed through a combination of local distributors, Time Mark representatives, and direct sales personnel. Time Mark products are marketed under two trade names: “Time Mark”, which includes the basic lines of industrial controls, and “Signaline”, which is a recognized brand name for all of our timing devices.
The Model 30 is a High Voltage Multifunction Timer. Its digital design provides high accuracy, repeatability and response time. The output of the Model 30 is a heavy-duty...
The Time Mark model 430 pump controller is a versatile and advanced liquid level/pump management system. The Model 430 was designed to control up to three pumps with a 4-20mA ...
The Model 20 & 21 are microcontroller-based universal 3-phase monitors for protecting 3-phase motors from abnormal power conditions. They can detect under voltage, over...
The Model 4052 Pump-Down Controller provides total control for duplex pumping systems. The Model 4052 monitors, controls and displays the liquid level in a tank or reservoir, ...
The Model 300 Programmable Timer can be set for one of five functions, covers four timing ranges, and has a power supply for any AC/DC voltage from 10 to 28 Volts or 40 to 260...
The Model 257 continuously monitors 3-phase power lines for abnormal conditions. When properly adjusted, the Model 257 monitor will detect phase loss on a loaded motor even when...
Time Mark Corporation is announcing the arrival of the new Model 64-5 Power Factor Regulator. This individual unit is a monitoring and power factor control system. Designed to...
The Models 269/269R Over & Under 3-Phase Monitor continuously monitors 3-phase lines for high voltage, low voltage, phase loss or phase reversal, and an adjustable .3 - 5 ...
The Model 301 Programmable Timer is designed to replace over 100 standard timers. One Model 301 can be set for one of five functions, covers four timing ranges, and has a universal...
The Model 253 Reverse Phase Relay is a solid-state sensing device designed for installation in equipment using 3-phase power. This unit is used where it is desirable to have a...
The Model 4062 Pump-Up Controller provides total control for duplex pumping systems. The Model 4062 monitors, controls and displays the liquid level in a tank or reservoir, up...
The Model 260 Voltage Sensor is a single set-point voltage sensor. Input voltages above the set-point cause the output contacts to energize (contacts 1 & 8 closed). Input ...
The Model 553 Re-Acceleration Relay is designed to take the place of a voltage sensing relay and two time delay relays. When voltage is applied to the Model 553, and the external...
The Model SPD Series (Surge Protection Devices) are designed to protect sensitive electronic equipment from the harmful effects of transients and RFI/EMI interference.Models are...
The Model 2922 Frequency Monitor is designed to monitor power line frequency. It is intended for systems where line frequency variations will cause improper operation of electrical...
The Models 332 and 362 Interval Timers are designed for a wide usage in new or replacement industrial applications. Examples include automatic and batch control circuits, where...
The Model 441 Multi-Stage Alternator is designed to control the operating sequence of multi-stage motor/pumping systems. It can also be used to maintain the desired level of pressure...
The Models 331 and 361 Release Delay Relays are designed for a wide usage in new or replacement industrial applications. Examples include delay-off circuits, batch processing ...
The Model 4092-I Isolated Dual Seal Failure Detector is designed specifically for monitoring the shaft seals of two submersible pumps. All electrical inputs are totally isolated...
The Models 338 and 368 Recycle Timers are designed to cycle a load on and off, or to cycle between two loads. The ON and OFF cycles are independently adjustable on each model....
The Model 208A & 208D Line Voltage & Phase Sequence Detectors allows quick and easy determination of phase sequence (either ABC or CBA).Available in 50/60 Hz and 400 Hz...
The Model 349 Series Override Timers are one-shot timers designed as lighting control timers or override controls for energy management applications. The timers are designed to...
The Models 278/2780 AC Current Transducer is designed to accept an AC current input, and provide a proportional DC output. A linear transformer input is coupled to a solid-state...
The Model 410 Auto-Charged Capacitor Trip Device is a high-speed capacitor-type circuit breaker tripping unit. It differs from the conventional capacitor trip device in that it...
The Model 173 AC Current Monitor is a single set-point AC current monitor. It can be used to detect either over current or under current, depending on whether the set-point is...
The Model 16-1-X-X protects equipment from Over, Under, Over/Under voltage or rapid cycling conditions that can damage valuable equipment. Trip and restart delays are adjustable...
The Model 261 series Alternating Relay is designed for duplex pumping systems where it is desirable to equalize pump run time. The solid-state alternating circuit drives an internal...
This device will only energize the relay if an unbalance exists. Zero volts on all three phases is considered a balanced condition. This allows the Model 2002Y to be used with...
Model 16-1 monitor protects equipment from over, under, over/under voltage or rapid cycling conditions. Trip and restart delays are adjustable or can be disabled.• Input Voltage...
