66670c53c40378000846f470 160 160

PennEngineering

Founded in 1942 and celebrating 75 years, PennEngineering is a global leader in the fastening industry with technical and manufacturing facilities in North America, Europe, and Asia supported by a global engineering-focused sales force and a worldwide network of authorized distributors.
5190 Old Easton Rd.
Danboro, PA 18916
USA
(215) 766-8853
Visit Company Website

More Info on PennEngineering

66670c53c40378000846f470 160 160

Founded in 1942 and celebrating 75 years, PennEngineering is a global leader in the fastening industry with technical and manufacturing facilities in North America, Europe, and Asia supported by a global engineering-focused sales force and a worldwide network of authorized distributors.

Products

830 350
Aluminum versions of SI brand threaded inserts introduce lead-free and lightweight alternatives to brass counterparts.
Nov. 16, 2018
830 350
Penn's tracksert pins eliminate any need for mating threads from tapped holes.
June 19, 2018
830 350
PennEngineering's studs accommodate paints and coatings without compromising performance.
April 16, 2018
830 350
PennEngineering's panel screws eliminate risks associated with loose screws.
March 23, 2018
830 350
PennEngineering's standofsf install permanently in panels of any hardness.
March 8, 2018
830 350
PennEngineering's self-clinching flush nuts are ideal for applications where a thin metal sheet requires load-bearing threads stronger than tapped holes.
Dec. 18, 2017
830 350
PennEngineering provides a cost effective alternative to micro srews with their microPEM TrackSert Pins.
Dec. 6, 2017
830 350
PennEngineering's assembly system's base plate can be bonded or mechanically attached to any rigid material.
Oct. 10, 2017
830 350
PennEngineering's self-clinching flush-head studs offer close-to-edge installation.
Sept. 23, 2017
830 350
PEM self-clinching stainless steel standoff fasteners with bright nickel plating provide ideal corrosion resistance.
Dec. 15, 2016

Additional content from PennEngineering

830 350
PEM fasteners enable secure and reliable attachment for a wide range of printed circuit board applications.
Nov. 8, 2016
830 350
PEM® Types PFC2™ and PFS2™ self-clinching captive panel screws provide secure and permanent attachment for thin-metal assemblies, enable subsequent access to an assembly whenever...
March 12, 2015
830 350
PEM® Type PFHV™ self-clinching captive panel screws introduce lower-cost alternatives to conventional spring-loaded versions.  These no-spring steel fasteners integrate a...
Jan. 28, 2015
830 350
PEM® floating self-clinching nuts for stainless steel assemblies enable easier mating-hole alignment to promote design flexibility in relaxed tolerance applications.  These...
Jan. 7, 2015
830 350
New microPEM® TackScrew™ fasteners from PennEngineering® integrate proven self-clinching technology for permanent sheet-to-sheet attachment while also incorporating a unique thread...
Nov. 19, 2014
830 350
New PEM® Type THFE™ heavy-duty studs from PennEngineering® clinch permanently into thin metal sheets to provide robust fastening solutions and practical alternatives to weld studs...
Aug. 27, 2014
830 350
New PEMSERT® Type F4 self-clinching flush nuts from PennEngineering® introduce ideal attachment solutions for stainless steel assemblies by providing load-bearing threads in thin...
July 7, 2014
830 350
The complete line of PEM® self-clinching prevailing torque locknuts for permanent installation in thin metal sheets is profiled in a new free 20-page product bulletin available...
May 7, 2014
830 350
PEM® self-clinching threaded studs in an expanding range of designs introduce ideal solutions offering application-specific benefits for thin metal attachments. All types of PEM...
March 13, 2014
830 350
PEM® self-clinching fasteners for use in stainless steel assemblies install reliably and permanently into thin stainless steel sheets and enable lighter designs by minimizing ...
Feb. 3, 2014
830 350
New microPEM® thru-threaded brass inserts for plastics introduce ideal fastener solutions to attach components in compact electronic assemblies.  These fasteners with threads...
Dec. 10, 2013
830 350
PEM® Type PFC4™ self-clinching captive panel screws introduce fastener solutions engineered to install permanently and reliably into stainless steel assemblies.  They can...
Nov. 5, 2013
830 350
Patented PEM® self-clinching cable tie-hooks remain securely fixed in place where installed to provide permanent attachment points for mounting wires and cables inside electronic...
Oct. 8, 2013
830 350
PEM® Types PF50™ and PF60™ self-clinching captive panel screws keep hardware parts count to a minimum by integrating a captive screw in a spring-loaded assembly to promote easy...
July 24, 2013
830 350
PEM® Type FHP™ self-clinching flush-head studs install permanently into thin stainless steel sheets to provide ideal solutions for attachment applications requiring superior corrosion...
April 12, 2013
830 350
PEM® SpotFast® self-clinching fasteners enable two sheets to be joined permanently in a flush-attachment connection without protrusions on either side.  These practical alternative...
Feb. 4, 2013
830 350
PEM® nylon insert self-locking fasteners provide a reusable, non-metallic prevailing torque thread lock to prevent threaded mating hardware from loosening in service due to vibration...
June 22, 2012
830 350
New ReelFast® microPEM™ (Type SMTSO™) fasteners for compact electronic assemblies install permanently on P.C. boards in the same manner and at the same time as other surface mount...
May 1, 2012
830 350
PEM® self-clinching thru-hole unthreaded standoff fasteners provide ideal solutions for applications where exact spacing is required between two panels in an assembly.  These...
March 27, 2012
830 350
New microPEM™ TackPin™ (Type T™) fasteners for compact electronic assemblies enable sheet-to-sheet attachment, replacing costly screw installation in applications where disassembly...
Feb. 14, 2012
830 350
New Atlas® MONEL® blind threaded inserts (Type AEKM) provide strong permanent threads in thin panel sections and offer excellent corrosion resistance ideally suited for attachment...
Jan. 18, 2012
830 350
PEM® C.A.P.S. ® captive panel screws uniquely integrate a captive screw with anti cross-threading feature and a PC/ABS colored knob to provide an ideal fastener solution where...
Oct. 19, 2011
830 350
The PEMSERTER® In-Die Fastener Feeding System is uniquely engineered to install self-clinching nuts, studs, and standoffs in assemblies during the stamping process. Working in...
Sept. 6, 2011
830 350
New PEM® Types PF7M™ and PF7MF™ captive panel screws introduce two distinct mounting styles for permanent installation into thin sheets. Both types feature small, compact, and...
Aug. 1, 2011
830 350
The new ATLAS® AE938 pull-to-pressure tool for installing blind threaded inserts promotes consistent performance and longer mandrel life in service. The portable tool’s pressure...
June 17, 2011
830 350
PEM® Type PTL2™ spring-loaded plunger assemblies allow users to quickly and easily move racks, slides, access panels, and similar equipment to new positions without requiring ...
April 29, 2011
830 350
New PEM® Type SGPC™ swaging collar studs provide ideal fastener solutions for attaching dissimilar panel materials and/or multiple panels.  They can accommodate most panel...
Feb. 16, 2011
830 350
The PEMSERTER® Series 3000™ automatic fastener-installation press system introduces “green” technology by performing without hydraulics to install all types of self-clinching ...
Jan. 25, 2011
830 350
PEM® spinning clinch bolts for thin metal panels introduce one-piece captive screw solutions whose controlled clinching action during installation permanently captivates the screw...
June 3, 2010
830 350
New Atlas® SpinTite® stainless steel half-hex shank threaded inserts offer superior corrosion resistance and provide ideal fastening hardware solutions for “blind” attachment ...
Nov. 18, 2008
830 350
The new PEMSERTER® Series 3000™ automatic fastener-installation press can install self-clinching fasteners up to 30% faster than traditional systems to deliver comparable productivity...
Oct. 5, 2007
830 350
PEM® Type SMPS™ self-clinching nuts can be mounted up to 50% closer to the edge of ultra-thin steel sheets than standard self-clinching nuts. Their relatively lower profile (smaller...
Dec. 2, 2006
830 350
SI® threaded inserts provide strong, reusable metal threads in plastics to allow for subsequent access to assemblies when required. These brass, stainless steel, or aluminum threaded...
Oct. 18, 2006
830 350
CREATE RIGHT-ANGLE ATTACHMENT POINTS ON PC BOARDS New PEM® ReelFast® surface mount R’ANGLE® fasteners offer an efficient and reliable method to create permanent right-angle attachment...
July 6, 2006