MD-16 Series Single Gas Detectors

Sept. 6, 2006
MD-16 Series of single gas detectors are wall mounted, continuous, and available for many different toxic gases such as Chlorine, Sulfur Dioxide, Carbon Monoxide, Hydrogen Sulfide, Ozone, Hydrogen, Nitric Oxide, Nitrogen Dioxide, Hydrogen Cyanide, Hydrogen Chloride, Ammonia or Oxygen with proven electrochemical sensor technology. Enclosed in a NEMA 4X fiberglass enclosure, the MD-16 is easy to install and operate. During normal operation, a green LED illuminates, confirming the unit is functional. Two alarms, WARNING and DANGER, are provided, with each indicating a specific concentration of gas. WARNING alarms cause the yellow LED to illuminate, while DANGER alarms cause the LED to flash red and the audible alarm to sound. The alarms can be tested, silenced, and reset remotely by shining a flashlight on the front panel or by pushing a button. • MEASURING PRINCIPLE Electrochemical sensor • RESPONSE TIME Less than 8 seconds to full alarm • VISUAL ALARMS CELL FAILURE (green flashing LED) • WARNING (yellow LED) • DANGER (red blinking LED) • AUDIBLE ALARMS Pulsating Piezo Buzzer (90dB) • AUXILIARY RELAY CONTACT DANGER - DPST 10A@ 125 VAC - Latching • AUXILIARY OUTPUTS Cell Failure + 12 VDC, WARNING + 12 VDC, • Power Failure + 12 VDC • DRIFT Less than 2% per month • TEMPERATURE RANGE 5 o F to 104 o F (-15o C to 40 o C) • HUMIDITY RANGE 15 to 90% (non-condensing) • POWER SUPPLY 110 / 220 VAC, 50/60 Hz (specify) • Remote Power Transformer • ENCLOSURE NEMA 4X • WEIGHT Less than 2 lbs. • DIMENSIONS 3.6" x 6.0" x 3.5"