Baby Gyro Air G-200H Shop Vacuum Skips Filter Bags
Sanding dust in workbench crevices, chips packed into machine tracks, and debris scattered across the floor fall outside the reach of central dust collection systems, leaving craftspeople to rely on shop vacuums that lose suction and clog filters over time. The BABY GYRO AIR G-200H is a shop vacuum built to handle this cleanup without the performance drop-off, delivering 550 Air Watts, 112 inches of water (28,000 Pa) of static pressure, and 182 CFM of airflow from a 3 hp brushless DC motor rated for continuous-duty use.
The unit relies on Gyro Air Separation Technology to capture 99.7% of dust and debris before it reaches the filter, maintaining suction and keeping the filter clear without disposable bags. A manual air-pulse cleaning function restores airflow in seconds, and the motor runs at a variable 12,000 to 25,000 rpm.
Filtration reaches 99.35% for 0.3 to 0.5 μm particles, with emissions as low as 0.05 mg/m³, and noise output runs as low as 75 dB. A single switch converts the unit from vacuum to blower.
Controls are managed through a 7-inch (17.8 cm) touchscreen showing real-time pressure and dust-full auto shutoff, or through a wearable wrist remote for start, stop, and speed adjustment away from the unit. The chassis lays flat at 90° for truck-bed mobility and includes a roll-out 7.4 gal (28 L) bin. The unit ships with an 11.5 ft (3.5 m) anti-static hose, a cleaning nozzle, and the wireless wrist remote.
Applications
- Workbench crevice and machine track cleanup
- Floor debris removal after cutting operations
- On-demand blower use for chip clearing
Industries
- Woodworking
- Manufacturing
- Fabrication shops
Who It's For
- Shops replacing filter bags often
- Operators needing vacuum and blower in one tool
- Teams needing hands-free speed control at the bench
- Mobile setups needing truck-bed storage
Features:
- 550 Air Watts of suction power
- 112 in of water (28,000 Pa) static pressure
- 182 CFM airflow
- 3 hp brushless DC motor, continuous-duty rated
- Gyro Air Separation Technology captures 99.7% of dust before the filter
- Bags optional
- 2-in-1 vacuum and blower switch
- 7 in (17.8 cm) touchscreen with real-time pressure display and dust-full auto shutoff
- Wearable wrist remote for start, stop, and speed control
- Variable speed, 12,000 to 25,000 rpm
- Manual air-pulse filter cleaning
- 99.35% filtration of 0.3 to 0.5 μm particles
- Emissions as low as 0.05 mg/m³
- Noise levels down to 75 dB
- 90° lay-flat design for truck-bed mobility
- Roll-out 7.4 gal (28 L) bin
- Includes 11.5 ft (3.5 m) anti-static hose, cleaning nozzle, and wireless wrist remote
Harvey Industries International
Montclair, CA
(888) 211-0397
[email protected]
harveywoodworking.com