Electronic Protection Epoxy
UC-2524 is a flame resistant potting/casting material that is used for environmental protection of electronics. It yields a very low cure stress as well as high impact resistance over a temperature range of -55° to 130°C. With excellent electrical properties, this compound is a perfect choice for high voltage power supplies and ignition coils.
Multi-Point Lubrication System
SKF USA Inc.
Automatically lubricate multiple bearing points in rotating equipment applications across a variety of industries with the MultiPoint Automatic Lubricator TLMP series. The TLMP system can supply from 1 to 18 lubrication points on a controlled and timely basis in order to deliver the proper lubrication amount at the required frequency to optimize bearing performance and equipment reliability.
FreezeBond premixed and frozen adhesives remove the drawbacks of working with two component adhesives and potting compounds. They eliminate waste, reduce worker exposure to chemicals, and improve quality. The two components of the epoxy or silicone system are premixed together in the correct ratio where the air-free material is packaged in a ready-to-use syringe and then frozen to stop the chemical reaction. The syringes, which range from 3 to 55 cc (also available in larger 6 oz. cartridges), are shipped on dry ice and stored in a freezer at -40°C.
Master Bond Inc
EP41S-5 provides a strong resistance to a wide array of chemicals, including acids, bases, alcohols, fuels and many solvents. This two-part epoxy combines physical strength properties and electrical insulation values, making it ideal for many bonding, sealing, coating, and encapsulating applications.
Battery-Driven Grease Gun
SKF USA Inc.
The Battery-Driven Grease Gun maximizes the efficiency and accuracy of manual lubrication for bearings, machines, and off-road equipment across industries. It comes with a 36-in. high pressure hose, 20 V lithium battery, and 90-min. charger. An integrated grease meter dispenses the proper amount of lubricant for an application to prevent over or under-greasing. The grease gun can dispense up to 15 grease cartridges per battery charge and delivers two flow rates adjustable for a specific application.
Prevent Adhesive Degradation
Graco Liquid Control
The InvisiPac HM25cTank-Free Hot Melt Delivery System is ideal for reducing adhesive costs and boosting factory production in packaging industry applications. It features a compact size and form factor that easily integrates into existing packaging lines with no need to reconfigure packaging lines due to space constraints. With no tank char, no nozzle plugging, and warm up times of less than 10 minutes, the InvisiPac system is an alternative to traditional hot melt tanks in any packaging application.
Walter Surface Technologies
A true innovation in plasma and laser cutting, E-Weld Plasma ceramic, water-based, anti-spatter solution reduces slag build-up on laser and plasma cutting tables. E-Weld Plasma is applied to plasma and laser cutting tables with an ergonomic arm-mounted applicator. Users can quickly and easily coat areas as large as 500 square feet. A first-to-market product, E-Weld Plasma is applied by painting or spraying.
UltraLube professional-grade greases, oils, and spray lubricants & penetrants specifically formulated and packaged for a variety of agricultural, commercial, industrial, manufacturing, marine, and transportation uses. With four times the natural lubricity of petroleum-based oils, UltraLube products instantly penetrate into areas where lubrication is needed most, creating a long-lasting bond to metal and plastic surfaces. UltraLube is eco-safe and non-toxic, making it safer for use in work environments.