 |
Supplier: Novotechnik US Inc
Novotechnik U.S. introduces the Contelec Vert-X 21 LP Series of low power sensors. These non-contact angle sensors consume only 300 µA of current at a power supply level of 3.3 V. Other key specifications for Vert-X 21 LP include 0 to 360° measurement range, 12-bit resolution, repeatability to 0.1°, and maximum hysteresis of 0.2°. Power supply range is 1.8 V to 5.5 V. Output voltage 10 to 90% of power supply is standard with other percentage values available as an option. Vert-X 21 LP Serie......
|
|
 |
Supplier: Novotechnik US Inc
Part Number LS1 Series
Novotechnik U.S. introduces the LS1 Series of non-contact linear position sensors. These sensors are based on Novotechnik’s Novopad, a non-contacting inductive technology, are insensitive to magnetic fields and have no mechanical sensor track. Models with and without return spring are available. The LS1 Series feature programmable end-points using easily accessible push buttons on top of the sensor. Programming is achieved using a signal processor integrated into the sensor and two LED programming......
|
|
 |
Supplier: Novotechnik US Inc
Novotechnik, U.S. introduces the TP1 Series of magnetostrictive position sensors that provide non-contact, absolute, linear position. These sensors meet all specifications without the need for time-consuming set-point adjustments– also referred to as null and span. The TP1 Series is plug-in compatible with other similar sensors and is offered in standard measurement ranges of 50 to 4,500 mm. Other key specifications include update rate of 62 µsec, absolute linearity to within ± 0.02 % of F.S, 16-bit reso......
|
|
 |
Supplier: Novotechnik US Inc
ML Series of rotary sensors measure angle up to 100 turns or 36,000° of mechanical travel and have a life of over 15 million turns. The ML Series includes five models each optimized for their maximum 6, 10, 25, 50 or 100 turns. Repeatability is to ±0.01% or better and Independent linearity is as low as ±0.25%. Electrical ranges for the models are 0° to 2,160°, 3,240°, 8,280°, 17,280° or 34,560°. Maximum resistance value is either 5 kΩ or 10kΩ, depending on model and temperature c......
|
|
 |
Supplier: Novotechnik US Inc
Novotechnik U.S. introduces the R-Series of magnetic rotary angle sensors. These sensors use the orientation of a magnetic pick up to determine angle so that there is no mechanical wear. An embedded microprocessor, contained within the R-Series sensors, converts the magnetic orientation to an analog output that is repeatable to within 0.03% or 0.1° of measurement range– depending on model. These rotary position sensors can be programmed and reprogrammed for your application’s angle, CW/CCW directio......
|
|
 |
Supplier: Novotechnik US Inc
Novotechnik U.S. introduces the Vert-X 90E Series of touchless rotary angle sensors. These sensors use a magnetic pick up that is secured to the rotating object, so that there is no direct mechanical linkage between the shaft and the measuring system, and therefore no wear. The height of a Vert-X 90E Series sensor is a thin 0.59 inch and they are 3.54 inches in diameter. Measurement range is 0 to 360° and repeatability is 0.1°. These rotary sensors are designed for harsh environments with environmental p......
|
|
 |
Supplier: Novotechnik US Inc
Novotechnik U.S. introduces the Vert-X 22E Series of programmable touchless rotary sensors. These sensors use a magnetic pick up that is secured to the rotating object, so that there is no direct mechanical linkage between the shaft and the measuring system, and therefore no wear. Vert-X 22E Series can be programmed by customers or at the factory for the slope of the linear output, zero and end-points, mid-point and switch steps. What this means is that customers can optimize this angle sensor for their......
|
|
|
Supplier: Novotechnik US Inc
Part Number Vert-X 22
Novotechnik U.S. introduces the Vert-X 22 Series of touchless sensors. These touchless magnetic angle sensors feature a permanent magnet that is secured to the rotating object, so that there is no direct mechanical linkage between the shaft and the measuring system, and therefore no wear. Key specifications for Vert-X 22 include 0 to 360° measurement range, resolution to 14-bit, repeatability of 0.1° or better, and maximum hysteresis of 0.1°. Eight output options are available: 0.1 to 10 V, 0.5 to 4.5 V,......
|
|
 |
Supplier: Novotechnik US Inc
Part Number RSM 2800 Series
Novotechnik U.S. has introduced a new series of non-contact sensors that combine an angular position sensor with resolution of 0.1° and a rotation counter. The RSM 2800 Series supplies absolute position values and rotational counts up to 16 turns without mechanical gearing, batteries or optics. It works using magneto-resistive technology. Designed for industrial, materials handling, robotic, overhead doors and automotive drive-by-wire applications, RSM 2800 tracks and permanently stores shaft rotation as......
|
|
 |
Supplier: Novotechnik US Inc
Part Number TX2 Series
Novotechnik introduces the TX2 Series of linear position sensors. This family of rod-style sensors is rated at IP 67 to protect from dirt, dust and humidity. TX2 Series sensors are available from stock in eight stroke lengths from 25 to 300 mm. These sensors also feature compact size with mechanical lengths from 88 to 374 mm, measured on center of pivot heads and a housing diameter of 18 mm. The sensors feature backlash-free pivot heads that provide up to 12.5° of free movement, which can especially bene......
|
|
|
|