Power Supply;AC-DC;24V@10A;85-264V In;Enclosed;DIN Rail Mount;QUINT Series
Supplier: Allied Electronics
Part Number 70000951
Selective Fuse Breaking shuts down faulty current paths while delivering power to other loads
The static POWER BOOST provides an dependable way to start heavy loads
The power supply unit visually warns of critical operating states before errors occur
Narrow design results in more space on the mounting rail for other components
100 to 240 VAC nominal input voltage
DC to DC converter, AC to DC converter
LED green operating voltage display
IP20 degree of protection
-25 to 70 °C operating temperature
Pluggable screw connection
CB, UL, cULus Recognized, CSA Certified
Primary Type:AC-DC | Configuration:Enclosed | Type:Industrial | Mounting Type:DIN Rail | Phoenix Part Number:QUINT-PS/1AC/24DC/10 | Voltage, Output:24 VDC | Voltage, Input:85-264 | Operation:Switching | Output:24VDC@10A | Power, Output:240 | Number of Outputs:1 | Brand/Series:QUINT Series |
The QUINT SFB is the first industrial grade power supply to feature Selective Fuse Breaking (SFB), a technology that enables standard power circuit breakers to be triggered reliably and quickly. This power supply provides up to six times nominal current for 12 ms. This short burst of current allows individual circuit breakers to react to overloads. Faulty current paths are shut down, while the power supply continues to deliver power to the other loads. The SFB technology's power reserve is also available for loads with high start-up current peaks. This power supply also provides continual diagnostic monitoring by constantly checking the output voltage and output current. This predictive function monitoring recognizes critical operating states, visualizes and reports them to the controller in good time. This early detection warns of critical operating states before errors occur. When the power supply system is operating under nominal conditions a (DC OK) LED indicates the status on the power supply unit. During overload conditions, the (DC OK) LED will change state to indicate possible fault conditions. The power supply also has an additional LED to indicate the unit is supplying more than nominal current, when in the Power Boost mode. The Quint SFB Power supplies are an average of 30 percent narrower than standard QUINT Power Supply units. This frees space on the mounting rail for other components. A wide temperature range and international approvals make the QUINT SFB an ideal power supply for industrial applications. The QUINT-PS/1AC/24DC/5 is a 24 V DC, 5 Amp power supply unit. Features:
Reviews & Comments
Part Number 70000506
RCA to BNC Series Adapters, Nickel Plated Brass Between Series Adapters solve a variety of connection problems where connectors of different types could ordinarily not be mated together. Each adapter has a different type coupling at each end allow...
Part Number 70000522
Modular Plugs, Gold Plating Contact, 24 to 26 AWG Wire Size Connector, EZ-RJ45 Modular Plug, Category 5, for twisted pair cables The new patented EZ-RJ45™ connector simplifies installation, allowing the twisted cable pairs to insert through the co...
Part Number 70000941
The QUINT DC to DC UPS is a family of 24 VDC uninterruptible power supplies that are scalable and DIN-Rail mountable. These industrial grade UPS systems are ideal for the factory floor or process environment. The UPS remains in a stand-by mode un...