SUHNER unveiled its new feed technology for its pneumatic drilling and carriage units.
This innovative system allows the electronic control of the pneumatic feed paths and speeds. SUHNER therefore offers an extremely low cost alternative to CNC technology.
The heart of this new feed system is the so called Rhedamp damping cyclinder.
The electrorheological fluid it contains is RheOil, consisting of a carrier liquid and polarising particles of polyurethane. When an electric field is applied, RheOil becomes highly viscous to almost solid within just a few milliseconds. The higher the voltage applied, the more tightly the particles "hold" together. Viscosity ranges from a minimum value resembling milk to the higher strengths e.g. of a pencil eraser.
The medium can be changed to any one of these viscosities within milliseconds, any number of times and free of wear. The effect does not deteriorate. Conventional feed systems feature a hydraulic cushioning cylinder that must be used to configure the pneumatic drilling and carriage units. This involves great effort and sensitivity for the rapid and working traverse paths and speed. Only one rapid traverse and working speed can be set over the whole stroke.
Electrorheology allows the speed to be changed at any point over the cylinder's advance and return strokes.
The standard pneumatic drilling and carriage units can therefore be used for new machining cycles and therefore new applications.
Now other cycles are possible as standard in addition to the normal drilling cycle "rapid traverse advance – working traverse – rapid traverse return".
- chip removal (peck drilling)
- intermittent feed (chip breakage)
- jump function (two walled drilling of pipes)
- various feed speeds e.g. for shouldered holes (countersinking)
- reverse countersinking
All of these functions require a measuring system. This takes the form of a linear potentiometer with a depth and positional precision of 0.1 mm.
The ERdrill system also includes a small electronic drive and feed controller that does not require any programming knowledge. Solely one of the above working cycles is selected on the controller's display. Then the paths are entered in mm and the speeds in mm/min.
Suhner offers LRC 20 pneumatic hand tools for grinding, milling, and polishing difficult-to-access areas, such as the leading edges and corners of impellers and the insides of narrow pipes. The tools’ drive pr...
Chip producing machining operations with modern tools today demand progressively higher cutting speeds, specifically for metals with high cutting speed rates or small diameter hole drilling applications. The SUHNER machining unit type BEX15, proven in t...
Catalog presents the basic modular components that can be used in drilling, tapping, and machining applications. There is also an extensive tool holding section, technical drawings, custom equipment questionnaires, and machining data for a number of differ...