Pyro-Putty 653, a new high temperature sealant and metal repair compound produced by Aremco
Products, Inc., is now used to repair corrosion and other defects in castings and weldments for
commercial and industrial burners, boilers, ovens, and furnaces in applications to 2000°F.
Pyro-Putty 653 is an inorganic, single part, ceramic and metal filled paste which bonds tenaciously
to cast iron, steel and stainless steel, and withstands continuous operating temperatures and rigorous
thermal cycling to 2000°F.
Pyro-PuttR 653 is a thixotropic paste that can be applied to both horizontal and vertical surfaces in
cross-sections up to 1/2" thick.
It can be machined and sanded easily after setting at room
temperature for 4-8 hours and curing or exposed in-situ to a minimum of 200°F for 2-4 hours.
Pyro-Putty 653 is a chemically inert, inorganic compound that will not decompose at ultra high
temperatures. It is also water-dispersible, environmentally safe, and resistant too most fuels, solvents
and other corrosives.
Pyro-Putty 653 is ideal for sealing cast steel casings, housings, pipes, and flanges. It can also be
used as a replacement for non-structural weldments and flame spray repairs that otherwise fatigue
rapidly at high temperatures. Typical applications include repairing afterburners, boilers, exhaust
pipes, furnaces, incinerators, and ovens.
Pyro-Putty 653 is available from stock in pint, quart, gallon and five-gallon pails.
Part Number Heat-Away 640
Heat-Away™ 640 is a single-part, 100% solids, copper-filled, thermally conductive, silicone grease used in heat transfer applications from –60 to 550 ºF (-51 to 288 ºC). Heat-Away™ 640 is formulated as a thick paste that will not flow after application ...
Ceramabond 503, a new high temperature ceramic adhesive formulated by Aremco Products, Inc., is now usedto bond aluminum oxide ceramics for a wide variety of high temperature applications to 3200°F (1760°C). Ceramabond 503 is an inorganic, ...
Pyro-Tape™ 682-CR is a new chemically resistant, teflon®-coated, high temperature, fiberglass tape combined with a high strength silicone adhesive . The tape is rated from -100 °F (-73 °C) to 500 °F (260 °C), and provides an adhesive strength of 50 ounc...