 |
Supplier: Reid Supply Co
Reid Supply offers a wide range of Filters, FRL Accessories, Lubricators, Multiple-Component FRLs and Regulators. View specifications on a large selection of Filters, Regulators & Lubricators: Filters FRL Accessories Lubricators Multiple-Component FRLs Regulators...
|
|
 |
Supplier: Reid Supply Co
Reid Supply has a well-stocked assortment of adhesives & sealants; cleaning supplies; lubricants & coatings; retaining rings; storage; tape; ties & light fasteners; work site equipment; work site protection & safety supplies. View specifications on a large selection of Tool Room Aids & Maintenance Supplies: Adhesives & Sealants Cleaning Supplies Insect Repellent Lubricants & Coatings Retaining Rings Storage Tape Ties & Light Fasteners Work Site Equipment Work Site P......
|
|
 |
Supplier: Master Bond Inc
Part Number SM43HT
Master Bond Steelmaster 43HT is a high performance, stainless steel filled two component epoxy resin system for the cost effective repair, maintenance, rebuilding, restoring and resealing of worn or damaged metallic components. It is formulated to cure rapidly at room temperature and features a convenient 5 to 1 mix ratio by weight. It is easily mixed and applied with minimal sagging. This unique epoxy resin system develops high physical strength properties and exhibits excellent adhesion to many substra......
|
|
 |
Supplier: Master Bond Inc
Part Number EP21ANHT
Master Bond Polymer Adhesive EP21ANHT is a two component room temperature curing adhesive, sealant and coating that has an exceptionally high thermal conductivity of over 22 BTU•in/ft2 •hr•°F. EP21ANHT is recommended for high temperature applications where service temperatures may reach 400°F. It has an exceptionally forgiving 1:1 mix ratio by weight or volume. Although room temperature curable, accelerated cures are possible by adding heat. As a thermally conductive adhesive it will adhere to a wide var......
|
|
 |
Supplier: Master Bond Inc
Part Number EP24
Master Bond Polymer Adhesive EP24 is a fast curing two component epoxy adhesive for general purpose bonding, sealing, and coating formulated to cure at room temperature with a one-to-one mix ratio, weight or volume. It quickly develops a high bonding strength of more than 3000 psi at room temperature which unlike that of many other epoxy adhesives, is relatively insensitive to mixing ratio or substrate cleaning procedures. It produces durable, tough and high strength bonds which are remarkably resistant ......
|
|
 |
Supplier: Master Bond Inc
Part Number EP21LV
Master Bond Polymer System EP21LV is a two component, low viscosity epoxy resin system for high performance bonding, sealing, coating, encapsulation and casting. It is formulated to cure readily at room temperature or more quickly at elevated temperatures. It has a very forgiving 1 to 1 mix ratio by weight or volume. In fact, EP21LV has the unusual characteristic of being able to adjust the properties of the cured system by altering the mix ratio. Adding more A part (e.g. 2:1 mix ratio) gives a more rigi......
|
|
 |
Supplier: Master Bond Inc
Part Number EP21HT
Master Bond Polymer System EP21HT is a two component, room temperature curing epoxy adhesive, sealant and coating with high temperature resistance up to 400°F. EP21HT produces high strength, durable bonds that hold up well to thermal cycling and resist many chemicals including water, oils, fuels, acids, bases and salts. It bonds well to a variety of substrates including metals, glass, ceramics, wood, rubbers, and many plastics. Once cured, EP21HT possesses superb physical strength properties along with b......
|
|
 |
Supplier: Master Bond Inc
Part Number EP21FL
Master Bond Polymer System EP21FL is a low to moderate viscosity, two component epoxy resin system for high performance casting, bonding, sealing and coating formulated to cure at room temperature or more rapidly at elevated temperatures, with a four (4) to one (1) mix ratio by weight. This compound is 100% reactive and does not contain any solvents or other volatiles. It is well suited for bonding dissimilar substrates with different coefficients of expansion . As a lower viscosity system it is also wel......
|
|
 |
Supplier: Master Bond Inc
Part Number EP21TDCS
Master Bond Polymer System EP21TDCS is a two component, silver filled, electrically conductive adhesive for high performance bonding and sealing formulated to cure at room temperature or more rapidly at elevated temperatures. Unlike the majority of two part silver conductive epoxy systems, the EP21TDCS has a one-to-one mix ratio, by weight or volume. It readily develops a high bonding strength of more than 850 psi tensile shear and a T-peel of greater than 10 pli when measured and cured at 75°F . It is 1......
|
|
 |
Supplier: Master Bond Inc
Part Number EP21AR
Master Bond Polymer System EP21AR is a two component epoxy resin compound for durable, high performance, coating liner and adhesive/sealants with outstanding acid as well as excellent overall chemical resistance. The EP21AR compound which is formulated to cure at room temperature or more rapidly at elevated temperatures, with a convenient two-to-one non-critical mix ratio by weight, offers unsurpassed acid resistance. It can successfully withstand, for example, prolonged immersion in even 96-98% sulfuric......
|
|
|
|