Ultra High Power Density Digitally Controlled 500 Watt AC-DC Power Supply
Supplier: Emerson Network Power Part Number NTS500
Emerson Network Power, a business of Emerson (NYSE: EMR), has launched a digitally controlled 500 watt ac-dc power supply that offers an unprecedented power density of 11.9 watts per cubic inch. The new Astec NTS503 power supply has an exceptionally compact 4 x 7 inch footprint, making it easy for OEMs to incorporate a single unit that satisfies all their bulk dc power needs, and offers a choice of convection or forced-air cooling. The convection-cooled model has an output of 200 W and a height of just 1.5 inches, making it ideal for 1U (1.75 inch high) rack-mount chassis and other low-profile applications, while the fan-cooled version can deliver its full rated output of 500 W up to 50 °C with 30 CFM forced air. Both versions accommodate a wide ambient operating temperature range of 0 °C to 70 °C.
• Total Max Power: 500 W
• Input Voltage: 85 V to 246 V
• Output Voltage: 12 V to 48 V
• Outputs: Single
• Size (L x W x H): 7.000" x 4.000" x 1.500"
• Warranty: 2 years
• Operating Temperature: 0 to 50C
Intended primarily as medium power front-end units for distributed power systems, the small physical size and high functionality of Astec NTS503 ac-dc power supplies makes them especially suitable for use in information technology equipment (ITE) and light industrial systems. The power supplies are also available with medical approvals, for applications such as patient monitoring systems and other portable equipment used in medical wards and surgical operating theaters.
Astec NTS503 ac-dc power supplies generate a tightly regulated 12 V output that can be used to directly power boards fitted with multiple non-isolated point-of-load (POL) dc-dc converters. The convection cooled model can deliver up to 16.6 A, and the forced-air version can deliver up to 41.7 A. Both versions also provide an auxiliary 'always-on' regulated 5 Vdc @ 2 A output for applications that require standby operation, as well as a 12 V output for powering fans.
Astec NTS503 power supplies feature a universal input that accepts any voltage in the range 85 to 264 Vac at any frequency from 47 to 440 Hz, enabling them to be used in equipment destined for any part of the world. Active power factor correction minimizes input harmonic current distortion and ensures compliance with the international EN61000-3-2 standard. The power supplies employ the latest high frequency switch-mode technology to maximize conversion efficiency, typically achieving 85% at full load with a nominal 115 Vac input.
Built-in control and monitoring features include 'ac power fail' and 'dc OK' output signals and a remote on/off input, and the supplies are comprehensively protected against overvoltage, short-circuit and overtemperature conditions. Single-wire current sharing is available as standard, and the power supply incorporates an internal Or-ing diode on its main 12 V output, for fault-tolerant and N+1 redundancy applications.
The power supply is digitally controlled and features a PMBus(tm)-compliant I2C interface. This allows monitoring of critical parameters such as temperature, output voltage and current.
The main 12 V output can be adjusted 5% either side of nominal via an internal trim potentiometer or through the digital interface, and regulation is maintained to within ±2% for all line and load conditions. Differential remote sense facilities are provided to compensate for up to 0.5 V drop between the output terminals and the load. The auxiliary 5 Vdc output is regulated to within ±5% and can deliver up to 2.0 A; it is primarily intended for powering 'standby' circuitry that needs to remain on for most of the time, such as power-up/down sequencers, and is unaffected by the on/off status of the main 12 V output. The auxiliary 12 V fan output can deliver up to 1 A, or up to 0.5 A on the forced air version, and is present whenever the main 12 V output is on.
Astec NTS503 ac-dc power supplies comply with the rigorous EN55022-B and FCC part 15 Level B EMC standards for conducted noise and meet all applicable immunity standards, including EN61000-4-2, -3, -4, -5, -6 and -11 levels 3. The power supplies carry UL/cUL60950-1 and EN60950-1 VDE safety approvals, and the medical versions are also approved to UL/cUL60601-1 and VDE EN60601-1.
Sample quantities of Astec NTS503 ac-dc power supplies, including models with medical approvals, are available for immediate delivery. Standard lead-time for both types is stock to 8 weeks. Pricing starts at US$299 for the ITE/industrial models and US$325 for the medical models, in production quantities.
Reviews & Comments
Part Number NTS350
Emerson Network Power, a business of Emerson (NYSE:EMR), has expanded its popular Astec NTS Series family of 350-Watt bulk AC-DC switching power supplies to include new 24V output configur...
Part Number ATC210
Emerson Network Power, a business of Emerson (NYSE: EMR) today announced the availability of the industry's smallest front-end power solution to date for use on latest-generation telecoms cards. The majority of existing Advanced Telecom Computing Architect...
Part Number LPT50
CARLSBAD, Calif. -- July 18, 2006 -- Emerson Network Power, a business of Emerson (NYSE:EMR), has introduced a new line of compact, triple-output 50W switching power supplies from Astec Power (www.astecpower.com). The new Astec LPT50 Series accepts univers...