Air
Rotary Hammer Drills — SDS Plus
1' Bit Capacity For Drilling Concrete and Masonry
Model
No. 2 2404 0010 - Air Rotary Hammer Drill
Model No. 2 2404 0030 - Underwater Air Hammer Drill
- Uses
SDS - plus Shank Drill Bits
- Holes
up to 1' Diameter with Solid Carbide Tipped Bits; up
to 3' Diameter with Carbide Core Bits
Fast impact drilling of anchor holes and thru holes for concrete
and masonry.
Safer than electric in hazardous atmospheres and wet environments.
Designed for use in refineries, chemical plants, utilities, construction
and heavy industry.
A special water flushing attachment is included for suppression
of sparks and dust.
Uses standard SDS - Plus carbide tipped drill bits; up to 1' solid
bits in concrete and 3' core bits in brick and block.
Easily converts to straight drilling for steel and wood.
FEATURES:
- Holes
cost less with SDS Bits.
- Pneumatically
powered to eliminate electric motor sparking.
- Water
hook-up at depth gauge to help protect against bit sparking.
- Safety
clutch protects against overloading and jamming.
- Maintenance-free
gearhead (permanent lubrication and sealed gears).
- Built-in
oiler for air motor.
Model Numbers: Rotary Hammer Drill : 2 2404 0010
Underwater Hammer Drill : 2 2404 0030
Drill Speed: 0-625 RPM
Hammering Under Load: 0-3000 BPM
Solid Bit Capacity (Concrete): 1' Dia.
Core Bit Capacity (Concrete): 3' Dia.
Twist Drill (Steel): 1/2' Dia.
Power @ 90 PSI: 0.7 HP
Air Consumption @ 90 PSI: 21 CFM
Air Connection: 1/2' I.D.
Dimensions: 16 x 8-1/2 x 4 inches
Weight: 11 LBS
CS Unitec’s EAU 34/4 CB high-torque, reversible electric drill motor is ideal for a wide range of turning operations that require high torque, multiple speeds and forward and reversible direction. This extremely robust and heavy-duty drive motor is desi...
|
CS Unitec’s Model 6 1316 0050 explosion-proof, pneumatic impact wrench is suitable for zones with the potential for flammable gas, mist, vapor or dust. This tool is ATEX certified Ex II 2 GcT6 for use in these hazardous atmospheres, making it safer for ...
|
Part Number Model 5 1115 0020
CS Unitec’s new pneumatic circular saw is designed to dry cut steel plate up to 3/8” thick, as well as non-ferrous metal, plastic, grating, composite and corrugated materials. Portable and lightweight (19 lbs.), the Model 5 1115 0020 metal cutting saw i...
|