Receiver Bushings
Supplier: Carr Lane Mfg Co
FEATURES: Carr Lock(TM)System requires that each Clamp be used together with one of these Receiver Bushings. The clamp's locking balls engage the angled ID section of the Receiver Bushing, pulling the clamp firmly downward. Made in USA.
SIZES: Available for all Ball Lock Clamp shank diameters — see Dimensions page for part numbers:
| |
13mm |
| |
16mm |
| |
20mm |
| |
25mm |
| |
30mm |
| |
35mm |
| |
50mm |
INSTALLATION: Face-Mount Receiver Bushings can be bolted into a slip-fit bored hole from above, with three socket-head cap screws (furnished). Back-Mount Receiver Bushings are more compact, but take more effort to install. Back-mount bushings are installed in the subplate from below, with a slight press fit (measure actual bushing before boring hole to provide .0005 maximum press fit, to avoid ID distortion). With either bushing type, the installation holes must be jig bored for accurate size and location. Installed bushings will be approximately .012" below the subplate's top surface.
MATERIAL: 4340 steel, heat treated Rc 50-54, black oxide finish.
Reviews & Comments
Be the first to leave a review.
Leave your review
Your review will be reviewed and appear online within one to two business days.
Please add your email address if you would like to be entered in the prize giveaway!
Note that your Job title will be displayed with your review. Your email will NOT be displayed.
One-Touch Swing Clamps from Carr Lane offer simple, cost-effective clamping and unclamping of workpieces. Simply rotate into position, then clamp down in one continuous motion. These manually operated workholders are available in three sty...
|
Hook clamps from Carr Lane are extremely compact swing clamps that mount in a reamed hole, and are ideal in tight spaces where high clamping force is required. Available in standard or long arm versions, these compact, high force clamps swing convenient...
|
Tiny Vise edge clamps from Carr Lane offer strong clamping action in a mini size. Ideal for fixturing small parts, the unique clamps grip the side of a workpiece to keep the top clear for machining. Tiny Vise edge clamps are available in a wide range of...
|
|
|
advertisement
|