PT-400 Pressure Transducers
Supplier: Automation Products Group, Inc. Part Number P-400
Automation Products Group, Inc. (APG) introduces PT-400 Amplified Output Pressure Transducers. PT-400 pressure transmitters provide a minimum of 10 million operating cycles with high accuracy of ±25% F.S. (B.F.S.L.), in operating temperatures from -40 to 180°F. Additionally, these sensors cover pressures ranging from 0 up to 20,000 psi, along with high burst pressure to 3x full scale (limited by the process connection) and overpressure to 2x full scale for in-process reliability. The PT-400 is designed for demanding applications in oil drilling, water and wastewater industries as well as for general use in other industries.
* Standard Pressure Ranges
Gauge: From 0 to 1,000 psi
Sealed: From 100 to 20,000 psi
Absolute: From 0 to 20,000 psi
Overpressure: 2x full scale
Burst Pressure: 3x full scale or limit of process connection (whichever is less)
Accuracy (linearity & hysteresis): ± 0.25% of full scale (B.F.S.L.)
*Stability – One Year Zero Drift: < ±0.5% F.S.
Zero Balance Adjust: ±5% of full scale
Span Adjust: ±5%
Life: 10 million cycles minimum
Standard Compensated Temp: 0 to 130°F (-17 to 54°C)
Extended Compensated Temp (Optional): -40 to 180°F (-40 to 82°C)
Storage Temp: -40 to 180°F (-40 to 82°C)
Operating Temp: -40 to 180°F (-40 to 82°C)
Humidity: 0 to 90% relative
Weight: 10 oz. (283 g) typical
Wetted Materials: 17-4 SS, 316L SS
Media: Compatible with 17-4 SS, 316L SS
Process Cavity Volume: 0.0353 in.
*Hazardous Location Approvals: CSA/cCSAus Contract #237484
0-5 VDC, 0-10 VDC, 4-20 mA
*IS: Class I, Division 2; Groups C & D; Ex nL IIB T4
*Class I, Zone 2; AEx nL IIB T4
*Ambient: -40 to 85°C
IS: Class I, Division 1; Groups C & D; Ex ia IIB T4
Class I, Zone 0; AEx ia IIB T4
Ambient:-40 to 85°C
PT-400 pressure transducers weigh just 10 oz. (283 g) and offer standard 4-20mA, 0-5 VDC and 0-10 VDC outputs. Their integrated electronics are fully enclosed inside an all-welded stainless steel housing with a 1/4-18 NPTM fitting is standard. Even with the rugged stainless steel housing, users still have access to zero and span adjustments for calibration to specific application requirements. Their rugged construction and performance attributes make them well suited for static and dynamic pressure measurement where an amplified output signal is desired. A number of options, including extended temperature compensation, higher accuracy ratings and alternate process fittings, among others, are available.
The transmitters are cCSAus certified for use in Hazardous locations. Units with 0-5 VDC, 0-10 VDC and 4-20 mA outputs are rated for Class I, Div. 2, Groups C and D, and Class I, Zone 2, Group IIB hazardous locations. In addition, units with 4-20 mA output are rated for cCSAus certified for use in Class I, Div. 1, Groups C and D, and Class I, Zone 0, Group IIB hazardous locations.
Reviews & Comments
The COM Express Mini Module SOM-7568 features low power Intel gen. 8 graphics integrated in the SoC, with up to 16 Execution Units, and has twice the graphics performance compared with the previous platform as well as a significant enhancement with its ...
C- and S-Band GaN HEMT devices are designed to solve a number of long-standing issues for radar systems employing traditional traveling wave tube (TWT) amplifiers. These RF transistors provide the highest power and efficiency in the industry in a...
This 2mm vertical poke-home wire-to-board (WTB) contact, in the AVX’s 70-9296 Series, accepts 26–22AWG solid or stranded wires, supports current ratings as high as 8A, and is 37% smaller than the next smallest offering in the series. The small si...