POSITIVE PRESSURE LOW INTENSITY TUBE HEATERS WITH UNIQUE TUBE INTEGRITY SAFETY SYSTEM
Supplier: Space-Ray Part Number PCS
A line of positive pressure low intensity infrared tube heaters has been introduced by Space-Ray with a patent-pending Innovative Tube Integrity Safety System™ (TISS) that provides additional safety for building owners. The TISS™ system is unique to Space-Ray. Available in both natural and propane gas, the new PTS/PTU Series Tube Heaters from Space-Ray use positive pressure to push products of combustion through the heavy-duty calorized aluminized or alumatherm steel combustion chamber. The heat exchangers are available in heavy-duty hot-rolled steel or as an ALC option in calorized aluminized steel for high humidity/corrosive environments.
The heaters come with a choice of one-stage or two-stage input controls for added flexibility and a totally enclosed burner box that places all the power, thermostat and gas connections in one central location for easier installation and maintenance. By being fully enclosed, the noise level of the heaters is below 60 dB(A), making the heaters ideal for applications where minimal noise is desired.
CSA-Certified, the tube heaters are available in eight models and over 100 different configurations for maximum flexibility in custom designing an infrared heating system to precisely meet individual building heating requirements.
NEW PTS/PTU POSITIVE PRESSURE TUBE HEATERS
Capacities for the PTS/PTU Series range from 40,000 BTU/hr to 200,000 BTU/hr. The PTU Series is designed for use mainly in high heat loss areas and for spot heating while the PTS Series is designed for use in general building heating applications.
The heaters are ideal for retrofitting existing push through systems and are certified for vented (sidewall or through the roof venting) or indirect vented operations, depending on application requirements.
Applications for the new PTS/PTU Series Tube Heaters are varied and range from industrial plants and warehouses to aircraft hangars, machine shops, weld shops, maintenance facilities, automotive body shops and dealerships, fire stations, restaurants, sports facilities and greenhouses, farm buildings or dairy barns, waste water treatment plants, car washes and many others.
Unique TISS™ System and Heater Features
With the TISS™ system, an insulated wire is placed above the reflector. A low voltage circuit control continuously monitors the clearance between the reflectors and the ceiling for excessive heat and tube integrity compromise. If the heat increases due to heat exchanger failure, the wire melts, the safety circuit is broken and the gas controls shut down.
“We decided that if we introduced a positive pressure system, that we would take steps to assure the integrity of the system and provide the ultimate in fire safety
protection for positive pressure radiant tube heaters,” noted Bob Genisol, Vice President of Space-Ray. “We wanted a system that was safer than what is available in the market today. The TISS provides peace of mind. It may never be needed but in the unlikely event of a tube heater failure you will be pleased that you have a TISS system”.
Also unique to the PTS/PTU infrared heaters is a totally enclosed burner box that includes the blower motor, heavy-duty cast iron burner and other features standard with the PTS/PTU Series heaters. These standard features include an outside combustion air collar for added flexibility, external 24 Volt thermostat connection and a three prong power cord connection to minimize installation cost. Also standard within the box are a step opening combination gas valve for quiet operation and added safety, a ½-inch MPT gas connection and monitoring light systems for trouble shooting in case maintenance is required. A 36-inch long stainless steel gas connector is shipped as a standard option with the PTS/PTU Series Infrared Heaters.
Since the combustion chamber is totally enclosed, draft hoods are not required. A heavy-duty ball bearing blower motor comes permanently lubricated to reduce maintenance and does not require any lubrication for the life of it.
Reviews & Comments
Be the first to leave a review.
Leave your review
Your review will be reviewed and appear online within one to two business days.
Greenheck’s Vektor® line of high plume laboratory and fume exhaust systems has expanded with the addition of two new models. The Vektor®-CH utilizes an engineered high velocity discharge nozzle that efficiently exhausts air high above the roof. In ...
MovinCool®, a brand of DENSO Corporation, announces a new Climate ProTM 18 portable heat pump, which combines both cooling and heating capabilities in a single, self-contained unit. The compact system is 13 percent smaller and 22 percent ligh...
Full-color brochure from Micro Air Clean Air Systems details their MistMax™ Series High-Efficiency Mist Collector line for controlling oil and coolant mist in metalworking applications. The brochure contains engineering data and performance&nbs...