EZ-Cast 580N, a new high temperature silicone-rubber molding compound, produced by Aremco Products, Inc., is now used to fabricate high tear strength, flexible molds for casting ceramic fixtures. EZ-Cast 580N is ideal for producing high reliability master molds for casting ceramic fixtures. Material properties include a maximum temperature resistance of 400°F (204ºC), Shore “A” Durometer of 40, tensile shear strength of 700 psi minimum, and tear strength of 110 minimum lb/in.
EZ-Cast 580N is supplied as a two-part system that mixes in a ratio of 10 lbs resin to 1 lb catalyst. It sets in 24 hours at room temperature or in 4 hours at 120ºF.
EZ-Cast 580N is available from stock in pint, quart, and gallon kits.
Part Number Aremco-Bond 616
Aremco-Bond 616, a new silver-filled, low-cost, high temperature, electrically and thermally conductive adhesive is designed for electrical and electronic assembly applications to 360°F (182°C). The advanced, two-part, electrically and thermally conductive...
|
Ceramacast 645N, a new high temperature ceramic potting compound is now used to encapsulate and insulate high temperature, light-weight heaters for applications to 3000 °F (1650 °C). Aremco's Ceramacast 645N is a fused silica based ceramic ...
|
Aremcoloxtm 502-1400-96 is a high density, full-fired, 96% pure, red alumina ceramic that provides exceptional abrasion and corrosion resistance as well as high mechanical strength and electrical resistance for continuous operating temperatures to 3000 oF ...
|