Atomizing Systems Inc., has released a new fan-driven, high-pressure fog device for applying a dry,
non-wetting, cool water fog in any work space or, directly on machinery needing cooling or humidity. Even
within a room with 8 foot ceilings, no wetting will occur when installed properly. The wall fogger may be
mounted almost anywhere and is equipped with a quiet, pressure-sensing fan to add velocity to the fog particles.
This unit can replace expensive steam or electrically-driven units and only requires our 1/2 horsepower, 1,000psi
Cold Fog® pump system to operate up to six (6) fan units. Humidity, time or temperature controls may be
added for automatic operation.
When fogging stops, water-pressure at the pump is released instantly, check-valves on each nozzle close to
prevent dripping. Next, the energy-efficient fan shuts down & the unit is ready to start up again drip free. Each
fan outputs approximately 11 pounds/hour with standard nozzles, larger sizes available.
Power consumption is 1.1 amps (126 watts) at 115 volts, 60 hertz. Also available in 100 and 220 volts AC, 50
& 60 hertz.
When multiple fans are employed, manual shut-down of any fan on the system causes the fog pump to
automatically slow down while always maintaining the same pressure.
Part Number WS2320-HD
Some fine dusts put up more of a fight than the rest to lift off the ground. Ruwac USA's WS2320-HD is designed to fight that battle. This heavy duty intermittent duty vacuum features 11 Hg-in. of negative vacuum pressure that doesn’t gi...
Remove Plaster and Paint and Roughen Concrete Fast and Dust-FreeCS Unitec’s EPF 1503 scarifying machine uses carbide “star” cutters to roughen, descale, abrade, clean and texturize concrete, as well as remove plaster, old paint, adhesives, plastics and ...
3M introduces 3M Medium Capacity Sorbents to clean up lower volume spills and contain everyday drips and leaks. Designed for use in multiple industries, users can choose from three types: Maintenance (for non-aggressive liquids), Oil & Petrol...