Binary Valves
Supplier: Bimba Manufacturing Company
Mead's USV-100 provides alternating outputs from a single input
port. The valve has two outputs which are selected alternately by
applying a pulsing, on-off air signal to the input port. USV-100 will
not function properly with a sustained signal.
Operation
When pressure is applied to port 1, it flows through the valve to
provide an output at port 2. When the pressure is released from port 1,
the valve changes over so that when pressure is next applied at port 1,
air flows out through port 3. Release of the pressure again changes
the valve back to its original position. Therefore, each time pressure
is applied and released to port 1, outputs 2 and 3 change over. Note:
The air signal must be fully exhausted to enable the valve to change
over properly. Reviews & Comments
Be the first to leave a review.
Leave your review
Your review will be reviewed and appear online within one to two business days.
Please add your email address if you would like to be entered in the prize giveaway!
Note that your Job title will be displayed with your review. Your email will NOT be displayed.
Bimba Manufacturing Company introducs the Low Power Isonic® V2 Valve. Building on the strengths of Bimba/Meadʼs line of Isonic® solenoid valves, the new Low Power Isonic® V2 valve provides increased versatility for unparalleled performance. The V2ʼs li...
|
Mead's Quick Exhaust Valves (QEV) increase cylinder rod speed by dumping exhaust air directly at the cylinder instead of back through the control valve. Use one QEV in each cylinder port to increase rod speed in both directions...
|
Use Mead's Shuttle Valves to actuate a cylinder or valve from either of two air sources. Available for 1/8" and 1/4" tubing....
|
|
|
advertisement
It’s in the news. Everyone is talking about it. Pneumatic or electric?
Are you considering replacing a compressor and 200 pneumatic
cylinders with electric actuators to save compressor costs? Thinking
about building a new m... |
Can your company afford the costs of a product recall? In the food industry, recalls due to contamination can be devastating, but typically can be completely avoided. All too often, simple steps in a food safety protocol are overlooked,the result of whi... |
Can your company afford the costs of a product recall? In the food industry, recalls due to contamination can be devastating, but typically can be completely avoided. All too often, simple steps in a food safety protocol are overlooked, the result of which... |
It’s in the news. Everyone is talking about it. Pneumatic or electric?Are you considering replacing a compressor and 200 pneumatic cylinders with electric actuators to save compressor costs?Thinking about building a new machine with pneumatics because 3... |
A primary cause in many industrial accidents is that equipment that is “under repair” starts or moves suddenly while the worker is in a dangerous position within the machine. This can happen when there is a failure to properly identify, isolate, and eli... |
|