Advanced safety helmet
Tectra Safety Cap
Elvex proudly introduces a new advanced safety helmet that challenges the traditional appearance and functionality of safety caps. A quick summary of design elements and features:
• A striking contemporary design
• A lightweight Polyethylene shell
• Four head hugging suspensions
• Vented and non vented versions
• Non conductive and general duty versions
• Hidden suspension hangers
• Rain trough for water disbursement
• Contour at ears to accommodate hearing protection
• Accessory slot (30 mm)
• Complies with ANSI Z89.1-2009
Safety helmet appearance has not changed much in the last 50 years. Over the last several years some futuristic designs have appeared, but they have been too radical to create much of a following in the market place. We think that we have struck a good balance between a traditional shape and a modern and appealing design with the new Elvex Tectra safety helmet with clean crisp lines.
The most important aspect of a safety helmet suspension is that it holds the helmet securely on the head. The head hugging suspensions of the Tectra helmet have a low center of gravity than what is offered on other safety helmets. This feature results in a very secure feeling of a helmet that stays on the head. Four different suspensions are offered: four and six point ratchet suspensions and four and six point pin-lock suspensions. All suspensions have three height adjustments.
Vented and non vented
The Tectra helmet is available in vented and non vented versions. The vented version has eight ventilation holes at the crown of the helmet. On the non vented version the ventilation holes are permanently closed, and look like cosmetic decorations. Ventilated helmets cannot meet Class E (electrical) requirement of ANSI Z89.1-2003.
Types and Classes
Tectra is a Type I helmet, meaning that it is designed to provide protection from impacts to the top of the head. There are three classes of helmets: Class E (electrical) is rated 20,000 Volts, Class G (general) is tested to 2,200 Volts, and Class C (conductive) are not intended to provide protection against electrical hazards.
The Tectra helmet complies with ANSI Z89.1-2009 requirements for a Type I helmet. The non vented version complies with Class E, G and C, and the vented version complies with Class C.
Designed for accessories
The Tectra helmet is designed to work with accessories and comes with a standard 30 mm slot. It works with Elvex hearing protection and face protection. Use any of our four cap mount muff models, with suffix 29 or 30, such as HM-6029 or HM-6030. Use visor bracket model VB-30, in combination with any of 20 different face shields and wire mesh visors.
Reviews & Comments
Be the first to leave a review.
Leave your review
Your review will be reviewed and appear online within one to two business days.
Air-Safe™ N95 Reusable Respirator with Valved Fitler Frame (VFF) Technology delivers ease of use, hygiene of disposables & non-collapsing design. Save 30% over valved N95 disposables, superior comfort, acceptance & compliance. ...
Elvex® introduces the NANO! The lightweight, frameless design provides maximum eye protection. Polycarbonate Sculpted Lens Universal Nose Bridge 99% UV Protection Red Rubber Tem...
Part Number Go-Specs II™
Elvex Corporation today introduced the Go-Specs II™, an innovative compact and lightweight design that combines safety eyeglass technology with goggle design. The Go-Specs II™ can be used in multiple work environments and wide range conditions suc...