 |
Supplier: Time Mark Corp
Part Number Model 278/2780
The Models 278/2780 AC Current Transducer is designed to accept an AC current input, and provide a proportional DC output. A linear transformer input is coupled to a solid-state output amplifier. The Models are powered by a 115 VAC source, and is socket-mounted for ease of use. Models 278/2780 Current Transducers can be used with computer and programmable controls to provide: motor and power control; supervisory data acquisition; load monitoring; feedback control; energy management....
|
|
 |
Supplier: NK Technologies
NK Technologies introduces ATPR “E-Out” Series AC Current Transducers. ATPR current transducers combine a current transformer with a true RMS signal conditioner in a single package. This enables the ATPR series to produce a 0-5 or 0-10VDC RMS output on distorted waveforms located in the output of variable frequency drives, phase angle fired heating controls, and on linear loads in “noisy” power environments. “The ATPR series provides true RMS sensing, meaning output is proportional to the current ......
|
|
 |
Supplier: American Sensor Technologies
American Sensor Technologies, Inc. (AST) has released a new brochure highlighting its pressure transducer capabilities in the fluid power market. AST highlights various sensor types including pressure transducers and transmitters, differential pressure transducers, and multi-variable transmitters. The combination of AST’s sensor technology with compact designs allow for AST to support various applications and markets for pressure transducers. An explanation of various process conn......
|
|
 |
Supplier: American Sensor Technologies
Part Number AST5300
American Sensor Technologies, Inc. (AST) has released the AST5300 wet/wet differential pressure transducer for use in Explosion-Proof and Non-Incendive areas. Featuring all 316L and Inconel X750 material, the AST5300 is suitable for various liquids and gases requiring high line pressure (1,500 PSI) and low differential pressure (10 PSID) measurements. One of the biggest benefits to the AST5300 differential pressure transducer is that the sensor is completely free of fluid fill cavities.......
|
|
 |
Supplier: Transducers USA Inc.
Ideal for wet applications like sumps, bilge pumps, marine instruments or any other outdoor wet applications, this family of dust and water tight audio components that meet current IP requirements The system consists of a 6.8 x 2.7mm Omni directional microphone that is dust and water tight and ideal for outdoor usages. Operating voltage is 2.0 VDC at 100-20,000 KHz. Operating temperature range is -20 to 70°C. The Model KECG2742 microphone is teamed with a choice of two IP67 sealed piezo audi......
|
|
 |
Supplier: Transducers USA Inc.
Transducer USA has announced the availability of their new Model TRSTE-5025 Surface Mount Audio Transducer producing a very high SPL of 80 dBA minimum in a miniscule 5 x 5 x 2mm package. The top port sound release of the small sized TRSTE-5025 Audio Transducer makes it an ideal component for cell phones, hand held GPS, portable alarms or for any other application where size constraints and battery operation make it a product of choice. The TRSTE-5025 is shipped in a tape and reel package mak......
|
|
 |
Supplier: Ashcroft Inc
The new Heise® Model HPK compact pressure transducer brings renowned Heise® dependability and precision to an affordable, analog output device. Available with a choice of pressure and electrical connections, the HPK offers either current or voltage outputs to indicate readings from vacuum through 20,000 psig and absolute ranges to 150 psia. All welded stainless steel construction ensures durability and media compatibility, while an advanced sensor design delivers long term stability and ±0.15% F.S......
|
|
 |
Supplier: NK Technologies
NK Technologies introduces the ATS Current Sensing Switch and Transducer. The ATS series is a one piece solution that combines a limit alarm with an analog output signal transducer to monitor produced or consumed AC current up to 1200 amps, while magnetically isolating outputs and inputs to maximize safety. An innovative and patent pending rotary switch makes it easy for users to set the trip point. DIN rail mounting simplifies installation and provides an extremely secure mount that is resistant to con......
|
|
 |
Supplier: Transducers USA Inc.
Transducers USA has announced the addition of a new wall mount style to their ToneLight line of annunciators, all of which provide both sound and visual alerts. Two panel-mount styles are already available: a stainless steel model is well suited to harsher environments, while an all-plastic style can accommodate less demanding usages. The new wall-mount unit emits a siren-like sound. With the rated input voltage applied, all units provide distinct audio/visual warnings with flashing LED lights and repet......
|
|
 |
Supplier: Setra Systems Inc.
Part Number Model 209
Setra Systems, Inc. has introduced Model 209 variable capacitance pressure transducers, expressly designed for extreme environmental OEM and industrial grade environments, and particularly, applications in which cost may be a primary concern. The Model 209 is available in pressure ranges from 1 to 10,000 psig, with choice of gauge, sealed gauge, or vacuum pressure, and choice of 4-20 mA; 0.5 to 5.5 VDC; 1 to 6 VDC; or 0.5 to 4.5 VDC output, with ±0.25% full-scale accuracy across all ranges, a......
|
|
|
|