 |
Supplier: Extech Instruments Corp
Part Number 461950
Continuous & accurate readings from 5 to 99,990rpm Measure rpm from 5 to 99,990rpm with microprocessor quartz crystal accuracy of 0.05% Large LED display updates 1/sec (rpm<60) Resolution: 0.1rpm (5 to 1000rpm), 1rpm (1000 to 999rpm), 10rpm (10,000rpm to 99,990rpm) Unique design permits rpm measurements of a one hole gear or disk eliminating the need for special gears; Optional proximity and photo sensors...
|
|
 |
Supplier: Extech Instruments Corp
Part Number 461995
Combination Contact and Non-contact rpm measurements with laser Characters on display reverse direction depending on contact or photo mode Uses a Laser for greater distance non-contact measurements up to 6.5ft (2m) Memory/readings button holds last reading for 5 min and recalls min/max readings...
|
|
 |
Supplier: Extech Instruments Corp
Part Number 461825
2-in-1 Meter with stroboscope to analyze rotating objects and Tachometer to measure rpms Stroboscope course and fine flash rate adjustments to freeze and analyze rotating objects Battery operation brings motion analysis to any location Unique display features characters that reverse direction depending on measurement mode Large 0.4" (10mm) 5 digit LCD display Microprocessor based with quartz crystal oscillator to maintain high accuracy Tachometer memory stores last, max, and min readings...
|
|
 |
Supplier: Extech Instruments Corp
Part Number 461891
Fast and accurate rpm and surface speed measurements to 20,000rpm 0.05% basic accuracy Make contact measurements of rotating objects Measure linear surface speeds in ft/min or m/min using three accessory wheels provided Recalls Last/MAX/MIN values...
|
|
 |
Supplier: Extech Instruments Corp
Part Number 461893
Non-contact rpm measurements to 99,999rpm with integral light beam Make non-contact rpm measurements of rotating objects Use reflective tape on object to be measured and point the integral light beam Ideal measurement range up to 6" (152mm) distance Readings updated every second Recalls Last/MAX/MIN values...
|
|
 |
Supplier: Extech Instruments Corp
Part Number 461880
Measures Acceleration, Velocity and Displacement plus RPM and Linear Surface Speed Remote vibration sensor with magnetic adapter on 39"(1m) cable Wide frequency range of 10Hz to 1kHz RMS or Peak Value measurement modes Manual/Auto store/recall up to 1000 readings Data Hold and Auto shut-off Contact and Non-Contact (Laser) tachometer functions Uses a laser for greater distance non-contact measurements up to 4.9ft (1.5m) Large LCD with characters on display reverse direction depending on contact, photo, o......
|
|
 |
Supplier: Ono Sokki Technology
Part Number HT-4200
The new HT-4200 tachometer is small, thin, and lightweight, weighing less than 4-1/2oz., not only does it fit perfectly in your hand, it also easily slips into your shirt or pants pocket. Incorporated in this compact tachometer is a large easy to read LCD display. Measurement setup is as simple as applying a small piece of reflective tape marker or reflective paint to the surface of the object being measured. For operation, simply aim the HT-4200’s red light beam at the reflective marker and, an o......
|
|
 |
Newly introduced, full-featured Model JH2376 Pulse Conditioner is a “big brother” to JH Technology’s recently-announced JH376 & JH377 low-cost pulse amplifiers. It accepts input waveforms as low as 20 millivolts peak-to-peak or as high as 250Vrms and transforms them to fully-isolated 5 volt logic output pulses. Based on a design for a Navy application, it has been modified for general industrial use. Two inputs are included. Its low level input amplifies and conditions millivolt tachometer and turbi......
|
|
 |
Supplier: Electro-Sensors
Electro-Sensors, Inc. announces the ST420, a loop-powered, stainless steel analog shaft tachometer. The ST420 requires no user calibration, providing a dependable shaft speed monitoring solution right out of the box. The rugged, compact ST420—only 18mm in diameter—reliably detects magnetic pulses from a rotating shaft-mounted pulser disc or wrap. Then, the ST420 uses quartz crystal-based digital processing to convert pulses to a smooth, continuous 4-20mA analog signal directly proportional to the pulse f......
|
|
 |
Supplier: Fox srl
Part Number TM6
The Company FOX added to their range of Bimetallic Thermostats the execution of TMD4, which differs from the TM4 or TM6 series for the possibility to have two intervention point in a single instrument. This instrument, made with a compact design, gives the possibility to control the maximum and the minimum temperature of the system. Many Applications must fulfil this requirement obliging the Technicians to use two separated instruments increasing the costs of the mechanical parts and of the...
|
|
|
|