 |
Supplier: Harwil Corp
Part Number Q-12DS
Component Recognized (E85349) True flow switch performance at a price competitive with pressure switches Specialized cables and connectors available for O.E.M. applications. Available in a clear one piece 3/4 inch barbed tee eliminating leakage and labor associated with glued fittings. Sense low flow independently of pressure or temperature. The Q-12DS bending blade design eliminates all sliding and pivoting friction and sticking problems, providing......
|
|
 |
Supplier: Harwil Corp
Part Number Q-8DS
Component Recognized (E85349) Sense low flow independent of pressure or temperature. Turn off power or gas to heater to prevent meltdown. Automatic reset - ready to go as soon as flow is re-established. For direct control of pump motors, heaters, solenoid valves, etc. UL component recognized (E85349) FLOW SWITCH MODEL Q-8DS SPDT, 1/2 hp, 15 AMP switching capacity @ 115 or 230 VAC ......
|
|
 |
Supplier: Carr Lane Mfg Co
FEATURES: Hall-Effect Switches are used with magnetic-piston cylinders for position sensing. These switches are actuated by a magnetic ring installed on the cylinder's piston. As the magnetic ring passes under the switch, the switch's contacts close to provide an electrical signal. Hall-Effect Switches are 3-wire, solid-state devices that are recommended for low current DC loads, such as when interfacing with a programmable controller....
|
|
 |
Supplier: Bimba Manufacturing Company
TRD offers Reed, High Power AC Reed, DC Solid State and Reed Switches with built-in Circuit Protection to meet a wide variety of needs. These magnetically operated switches can be located anywhere in the actuator stroke range and will work with all TRD aluminum construction and stainless steel actuators. Quick, simple set-up. Highly visible red LED. RHT model is suitable for extreme temperatures, -40° F to 260° F (-40° C to 125° C). Variety of cable option: 24 and 120 inch plain cable leads and 8m......
|
|
|
Supplier: Bimba Manufacturing Company
TRD offers Reed, High Power AC Reed, DC Solid State and Reed Switches with built-in Circuit Protection to meet a wide variety of needs. These magnetically operated switches can be located anywhere in the actuator stroke range and will work with all TRD aluminum construction and stainless steel actuators. Quick, simple set-up. Highly visible red LED. RHT model is suitable for extreme temperatures, -40° F to 260° F (-40° C to 125° C). Variety of cable option: 24 and 120 inch plain cable leads and 8m......
|
|
 |
Supplier: Bimba Manufacturing Company
Compatible and tested for use with: Ultran Rodless Cylinders. Available in PCQ, PKQ, and RSU-1...
|
|
 |
Supplier: Bimba Manufacturing Company
Compatible and tested for use with: ISO-6431 Cylinders and Ultran Band Cylinders (25mm to 63mm bore sizes). Available in HSC-AB, HSK-AB, MRS-AB, UBR, UBSC and UBSK....
|
|
 |
Supplier: Bimba Manufacturing Company
Compatible and tested for use with: Original Line Cylinders and MRS Series Cylinders with -Z option. Available in MRS-.027, MRS-.087 and MRS-1.5-S....
|
|
 |
Supplier: Bimba Manufacturing Company
Compatible and tested for use with: Original Line Cylinders, Pneu-Turn Rotary Actuators, Linear Thrusters (-T option required), Ultran Band Cylinders (18mm bore only), Extruded Flat, Twist Clamp, Twin Bore, Stopper Cylinders, Extruded Flat Lift Table, Narrow Profile Air Table, and Low Profile Air Table. Available in MR, MS, MSC, and MSK....
|
|
 |
Supplier: Bimba Manufacturing Company
Compatible and tested for use with: Flat-1 Cylinders, Square Flat-1 Cylinders, Flat-II Cylinders, Square Flat-II Cylinders, and Ultran Rodless Actuators (with -T option). Available in HC and HK....
|
|
|
|