 |
Supplier: Harwil Corp
Noryl (PPO) with Optional Filter Boot Component Recognized (E85349) For Use in Highly Particle Contaminated Liquids: Sewage Waste water Contaminated ground water Machine cutting oils Medium slurries Corrosive Liquids such as: Mild acids and bases Sea water Rusty coolant water ( see here ). Special Features Particle contamination resistance is provided by a single convolute elastomeric flexible seal which is continuously flushed by the working fluid. Models for vertical or horizontal mounting. Maintenanc......
|
|
 |
Supplier: Harwil Corp
8 to 1900+ GPM, for pipes 1″ – 10″+ Component Recognized (E85349) Noryl Engineering Plastic (PPO) Polyphenylene Oxide During normal operations flow switches increase efficiency, save time and money by the continuous monitoring of deviations from optimum flow rates. During emergency conditions flow switches signal system malfunctions such as line breakage, pump failure, incorrect valve opening or closing, pipe, valve or filter clogging, etc. Typical Working Fluids For use in corrosive liquids such ......
|
|
 |
Supplier: Harwil Corp
Part Number Q-5SS
10 to 102,000+ GPM, for pipes 1”-48”+ 316 STAINLESS STEEL – Teflon – Viton – WETTED SURFACES For Use in Mildly Corrosive Chemicals Generally accepted for use with 316 Stainless Steel (For instance, mildly corrosive fluids such as): Aluminum Sulfate Crude Oil Diluted Sulfuric Acid Ethyl Chloride Hydrochloric Acid Lactic Acid Magnesium Hydroxide Nickel Sulfate Nitric Acid Phenol Potassium Dichromate Zinc Sulfate Plus Alcohols Filtered Sewage Water Gasoline Glycols Oils Pure Water Soap Solutions Tap Water ......
|
|
 |
Supplier: CS Hyde
Teflon® is highly regarded for its non-stick, anti-friction, extreme temperature, chemical resistance and high dielectric (insulating) strength. We supply Teflon® Tapes with adhesive in several forms: Pure Skived Teflon® PTFE Tape with adhesive, PTFE Coated Fiberglass Fabric Tape, Copper Teflon® Laminated Glass Tape and Black, Semi-Conductive, Anti-Static PTFE Coated Tape. FEP Tape is Optically clear, high temperature (-100 to +400F), chemically & moisture resistant. Electrically insulating. (Also s......
|
|
 |
Supplier: CS Hyde
Kapton® Polyimide is highly valued for its high temperature (-100F to +500F) range, excellent Dielectric Strength, puncture and chemical resistance. CS Hyde Company has a wide selection of Kapton® Tape (and Film) including Kapton® Tape with Silicone or Acrylic Adhesive, .001, .002 and .005 thick substrate.; .001 thick Kapton® film with silicone adhesive on BOTH sides(œDouble-sided Tape); ESD (Electro Static Dissapative ) Polyimide Tape. We stock Polyimide Tape in standard shapes: Discs, Squares, Don......
|
|
 |
Supplier: CS Hyde Co
CS Hyde Company has a wide range of unusual tapes made of High Performance Films that normally do not have pressure sensitive adhesive. Adhesive allows these films to be easily, cost effectively applied without labor intensive fastening systems. Available products include PEEK Tape, Kynar PVDF Tape, Ultem® Tape, Delrin & Acetal Tape, Zones Tapes with PTFE Coated Glass, UHMW, Thick Teflon® Tapes, Thick UHMW Tapes, UHMW and Teflon® High Bond Tapes, Silicone Rubber Sheet. Ask us about applying adhesive ......
|
|
 |
Supplier: CS Hyde Co.
CS Hyde Company is an Authorized 3M Converter and specializes in laminating 3M adhesives to many unusual materials. Our adhesive lamination capabilities allow us to work with films as thin as 003” and as thick as 1.0”; material width can be up to 61”. We convert a wide range of 3M products: Transfer Tapes, VHB, Foam, Foil, Double and Single Coated Adhesives, Adhesive Spray, etc. Ask us about your 3M product needs....
|
|
 |
Supplier: CS Hyde Co.
DuPont’s Kapton® Polyimide film is a high performance film that can be used at both high and low temperature extremes where other organic polymeric materials would not be functional. Maintains an excellent balance of electrical, thermal, mechanical, physical and chemical properties as well as a high dielectric strength. Superior chemical resistance--there are no known organic solvents. Kapton® does not melt or burn and has the highest UL-94 Flammability rating: V-0. Applications: electrical & electro......
|
|
 |
Supplier: CS Hyde Co
UHMW PE is the product of choice when applications require high slip (like Teflon®), anti-friction surfaces but need the added feature of being highly ABRASION & wear resistant. UHMW has a lower temperature range than PTFE (0F to 200F) but is tougher and resists gouging. It is perfect for Materials Handling Systems, Metal-to-metal Sliding Surface applications, chutes, guides, noise abatement, friction reduction. We provide a huge selection of UHMW Films (and UHMW Tapes WITH Adhesive). UHMW Film is O......
|
|
 |
Supplier: CS Hyde
Skived PTFE (Polytetrafluoroethylene) film is super slippery and resistant to extreme temperatures (up to 500F) and chemicals. Teflon® Film has superior dielectric strength. Examples of electrical applications include capacitor films, harnesses for electrical wiring in automotive and aerospace applications, spacers for transformers and other electrical insulation applications. Also used as a release sheet, barrier material, sliding surface, mold liner. Teflon® PTFE Films are sold by the sheet, lineal fo......
|
|
|
|