 |
Supplier: Sealant Equipment & Engineering Inc
Sealant Equipment & Engineering’s new Servo-Flo™ 105-HV High Volume, Variable-Ratio Meter System is ideal for high-precision meter-mix dispensing processes for 2-part materials. The high volume design dispenses up to 35 cubic inches, 575 cc, of metered and mixed material at 1:1 ratio. The unique dual servo motor system design allows the ratio to be adjusted without mechanical changes to the machine. The material ratio is easily adjusted without costly mechanical equipment alterations. The new Servo-......
|
|
 |
Supplier: Sealant Equipment & Engineering Inc
Sealant Equipment & Engineering, Inc.’s new 2600-093 Micro-Kiss™ Series Mix-Dispense Valves are designed for low-flow mixing and dispensing of 2-component adhesives and sealants such as silicones, epoxies, urethanes and acrylics. The Micro-Kiss Mix-Dispense Valves are used to apply 2-part adhesives and sealants for bonding, gasketing, potting and filling processes in aerospace, appliance, contractor, defense, electronics, filters, marine, medical, sporting goods, automotive, truck and bus component ......
|
|
 |
Supplier: Sealant Equipment & Engineering Inc
Sealant Equipment & Engineering’s new Dual-Station XYZ Robotic Dispensing System is designed to improve adhesive dispensing and product assembly by eliminating problems such as the need to speed up production, adhesive out of position, too much or not enough adhesive, excess waste, scrap or repairs and high production costs. XYZ Robotic dispensing systems are designed to accurately and quickly dispense 1-part and 2-parts adhesives and sealants such as silicone, epoxy, urethane and acrylic for bonding......
|
|
 |
Supplier: Systematic Automation
This compact and efficient modular ultraviolet conveyor is designed for curing coatings, adhesives and pigmented inks. It features a curing system with a UV lamp delivering 400 watts per inch of curing power. Touch screen control panel mounts anywhere on your conveyor, machine or system. A special black pigmented Teflon coating on the conveyor belt assures long belt life. Dozens of standard configurations are available. Modular design permits low cost customization....
|
|
 |
Supplier: Manncorp
PCB assemblers -- particularly contractors -- faced with the need to go lead-free while maintaining a tin/lead soldering presence, will welcome Manncorp’s 16.350 wave solder machine. In place of the usual single pot, the 16.350 can now be configured with two pots on roll-out carts to provide lead-free-to-Pb switching with ease. The 16.350 also adds economy to its versatility with a low solder pot capacity of only 200Kg. “Lead-free solder costs are escalating to over $40 per lb., which results in more tha......
|
|
 |
Supplier: Dymax Corp
Part Number BlueWave® LED DX-1000
DYMAX Corporation has introduced the BlueWave® LED DX-1000, an LED Light-Curing System designed to provide users with significant advantages over conventional lamp-curing systems including cooler curing temperatures, lower intensity degradation over time, more consistent cure results, lower energy consumption, and reduced costs. The system, which utilizes an environmentally friendly, high-intensity LED light source, can be configured to operate in either small-area flood or spot-cure mode and is cl......
|
|
 |
Supplier: Advanced Torque Products, LLC
Advanced Torque Products (ATP) has released a new, full-color, capabilities brochure describing its extensive line of innovative bolting products. These products are especially suited to aircraft and aerospace maintenance, repair & overhaul, marine, land and wind turbine, industrial, automotive and commercial applications. ATP’s digitally controlled, mechanical torque multipliers offer torque ranges from 600 to 40,000 ft./lbs., with accuracy to ±1%, even over extreme temperature fluctuations. These l......
|
|
 |
Supplier: PennEngineering
The PEMSERTER® In-Die Fastener Feeding System is uniquely engineered to install self-clinching nuts, studs, and standoffs in assemblies during the stamping process. Working in tandem with a stamping press (and properly tooled die) to feed and install fasteners, this portable system eliminates secondary operations typically required for fastener insertions. Users can realize increased assembly-line productivity, quality, and savings as two operations (stamping and fastener-install......
|
|
 |
Supplier: Sealant Equipment & Engineering Inc
Sealant Equipment & Engineering, Inc.’s new Pneumatic Servo Dispensing (PSD) system is a positive rod displacement metering system that combines the cost efficiency of a pneumatic drive motor with the controlling accuracy of a servo drive motor. The PSD system uses a positive rod displacement metering principle for maximum dispensing precision and eliminates the need for a servo drive motor or material flow meters in a dispensing system. The PSD integrates a pneumatic drive m......
|
|
 |
ACE Production Technology announces the development and introduction of a revolutionary new programmable fluxing system for selective soldering, a development that will enhance throughput, performance, quality, and ultimately flexibility of the selective soldering process. The KFS-VAF Volumetric Atomized Flux Applicator controls and dispenses atomized flux material on demand via a user-programmable control system. Unlike other atomized fluxers that require a mechanical adjustment every time the spray de......
|
|
|
|