|
Supplier: CS Unitec Inc
Part Number CSU 40 AUTO
CSU 40 AUTO Heavy-duty compact drill with automatic feed - holes up to 1-1/2' dia. • Power Feed automatically controls drill pressure to maintain optimal RPM and feed rate • Ideal hole cutting machine for steel fabricators, contractors and plant maintenance professionals • Compact height of 16-1/8' allows drilling in tight spaces • Lightweight and portable at only 37-1/2 lbs. for use on the job site or in the shop • Strong 10.5 Amp double-insulated motor • One-piece motor mount and arbor support for add......
|
|
 |
Supplier: CS Unitec
Part Number CSU 100/3DRL
CSU 100/3DRL Powerful reversible motor for drilling and tapping - holes up to 4 ' dia . • Variable-speed, high-torque 16 Amp motor with 2 gears (40-140 and 120-480 RPM) • Multiple speeds match cutter dia. to correct RPM to increase life • Robust machine with 10' stroke is ideal for drilling structural steel • High-density dual-coil magnet has holding strength of 6600 lbs. • Drills up to 4' diameter holes with Annular Cutters • Mechanical slip clutch disconnects the transmission in case of overload • Var......
|
|
 |
Supplier: CS Unitec Inc
Part Number CSU 50RL
CSU 50RL Reversible motor for drilling and tapping applications - holes up to 2 ' dia. • Variable-speed control in two gears • Ideal for drilling, tapping and countersinking • Compact height of 16-1/2' • Lightweight and portable at 29 lbs. • Strong 10.5 Amp reversible motor • HD dual-coil magnet has holding strength of 3750 lbs. • Easy 'twist and lock' keyless arbor • Drills up to 2' dia. holes with Annular Cutters • Optional Power Assist to maintain maximum RPM under full load • One-year warranty...
|
|
 |
Supplier: CS Unitec Inc
Part Number CSU 80AC
CSU 80AC Powerful high-torque motor with multiple speeds - holes up to 3-3/16 ' dia. • Robust, high-torque 15 Amp motor with four-speed gearbox (100 / 175 / 245 / 385 RPM) • Multiple speeds match cutter diameter to correct RPM to provide increased tool life and reduced cutter breakage • High-density dual-coil magnet has holding strength of 7040 lbs. • Drills up to 3-3/16' diameter holes with annular cutters and 1-1/4' with twist drills • Keyless arbor for annular cutters • Mechanical slip clutch disconn......
|
|
 |
Supplier: Metabo Corp
Metabo Corporation introduces the world's first cordless magnetic drill press. The new MAG 28 LTX utilizes a 25.2 V Li-Ion battery to power the tool. A permanent rare earth magnet, requiring no energy from the battery, allows the use of the mag drill in remote and previously inaccessible environments. The unique rare earth magnet offers up to 2,500 lbs of holding force, which can be adjusted for precise positioning when drilling on vertical, horizontal and sloped surfaces. The drill h......
|
|
 |
Supplier: Sandvik Coromant Co
Sandvik Coromant introduces the CoroDrill 861, a brand new range of solid carbide drills for deep hole drilling applications. Featuring Advanced Chip Management (ACM) flute geometry, the new drills are able to generate small, manageable chips. This, combined with specially designed point geometry to reduce thrust forces and patented double-offset margin geometry, helps provide the high stability necessary for drilling deep holes in the most expedient and efficient manner. Effective chip evacuation is cr......
|
|
 |
Supplier: CS Unitec Inc
Part Number MAB 845
CS Unitec’s new MAB 845 portable magnetic drill features a swivel base that provides 30 deg movement left and right and 3/4” forward and backward for drilling in hard-to-reach areas. With infinitely variable torque control and full-wave electronics, this heavy-duty drill cuts holes up to 4” dia. in structural steel and other metals. Additional capabilities include twist drilling and reaming up to 1-1/4” dia., tapping up to 1-1/8” dia. and countersinking up to 2”. A stroke length of 10” makes the MAB 845......
|
|
 |
Supplier: Sandvik Coromant Co
CoroDrill 860 solid carbide drill for steel drilling is a top performer for conventional drilling, chamfered holes, inclined surfaces, cross holes, stack drilling and convex/concave surfaces. With excellent chip evacuation control, when using high cutting data in long and short chipping materials, the drill provides consistently problem free drilling at high penetration rates. The new unique geometry combined with the new flute shape provides a cutting edge shape for effective clearanc......
|
|
 |
Supplier: Kennametal Inc
Kennametal is now introducing a line of Beyond™ solid-carbide KCN05™ routers specifically engineered for successfully machining CFRP. Four router styles are available: • A ball-nose router dedicated for pocketing and profiling • A down-cut style with left-hand flutes that compress fibers as it cuts • A compression-style router with left-hand flutes on the shaft and right-hand flutes at the bottom, which also compresses fibers into the material • ......
|
|
 |
Supplier: Widia
From its advanced VDS point geometry designed to reduce chipping on the cutting edge to its precision shank engineered for low runout, the WIDIA VariDrill™ is a new multi-application drill engineered to deliver acceptable hole finish and extended tool life across a wide range of materials, including in steels, stainless steels, cast irons, non-ferrous materials, and high-temperature alloys. VariDrill features an advanced point geometry and “marginless” design that reduces chipping on the tool......
|
|
|
|