"The unique design of this cable gland offers a complete gas block and explosion proof seal for the termination of continuous corrugated and interlocked armor cables in hazardous locations." http://www.lappusa.com/PDF/Page508-GlandforExplosiveAreas.pdf ...

"SKINTOP® MS-M ATEX and MSR-M ATEX were developed for use in areas with risk of explosion and for cables used with fail-safe circuits in housings and devices which require class “e” security. SKINTOP® MS-M ATEX and MSR-M ATEX are recommended for use in the chemical and petrochemical industry, mobile offshore and marine applications. SKINTOP® MSR-M ATEX is equipped with a reducer bushing to seal cables with a smaller outer diameter. SKINTOP® MS-M-63 Plus ATEX provides a clamping ...

"The SKINTOP® MS-M BRUSH provides centered, fixed strain relief with a liquid tight and dust proof seal (IP68), all in one step. Simply insert the cable, push the screen braid under the innovative EMC brush, tighten and the connection is made. The SKINTOP® MS-M BRUSH Plus sizes offers extra large clamping ranges." http://www.lappusa.com/PDF/Page506-SkintopMSMBrush-BrushPlus.pdf ...

"SKINTOP® MS-SC is uniquely designed to address EMC considerations with its simplified grounding feature. In a few easy steps, the cable is grounded, strain relieved and sealed from moisture and dust in accordance with IP 68. The cable gland's contact springs establish a continuous electrical path from the shield of the cable to equipment ground, creating a secure shield connection." http://www.lappusa.com/PDF/Page504-505-SkintopMSSC-MSSCL.pdf ...

"SKINTOP® MS-M-XL, MSR-M-XL and MS-M-63 PLUS are superior quality, liquid tight, metallic cable gland intended for applications where ruggedness, durability and long threads are required. SKINTOP® MS-M-63 PLUS provides a clamping range of 44 to 55 mm, which was not achievable before, while maintaining the protection, stability and safety of a strain relief cable gland." http://www.lappusa.com/PDF/Page503-SkintopMSMXL-MSRMXL.pdf ...

"SKINTOP® MS-M/ MSR-M is a superior quality, liquid tight, metallic cable gland intended for applications where ruggedness and durability are required. These cable glands are suitable for a wide range of applications from manufacturing machinery to measurement and control equipment, including automation and robotics." ...

"SKINTOP® MS-XL/ MSR-XL is a superior quality, liquid tight, metallic cable gland intended for applications where ruggedness, durability and long threads are required. These cable glands are suitable for a wide range of applications from manufacturing machinery to measurement and control equipment, including automation and robotics." http://www.lappusa.com/PDF/Page501-SkintopMSXL-MSR-XL.pdf ...

"SKINTOP® MS/ MSR is a superior quality, liquid tight, metallic cable gland intended for applications where ruggedness and durability are required. These cable glands are suitable for a wide range of applications from manufacturing machinery to measurement and control equipment, including automation and robotics." ...

"SKINTOP® MS-NPT/ MSR-NPT is a superior quality, liquid tight, metallic cable gland intended for applications where ruggedness and durability are required. These cable glands are suitable for a wide range of applications from manufacturing machinery to measurement and control equipment, including automation and robotics." http://www.lappusa.com/PDF/Page499-SkintopMS-NPTandMSRNPT.pdf ...

"SKINTOP® FLEX is a liquid tight, spiral strain relief that offers additional safety against overstress and conductor breakage. Ideally suited for hand held equipment, moving machinery and robotics." http://www.lappusa.com/PDF/Page492-493-SkintopFlex.pdf ...

"SKINTOP® CLICK is an innovative cable insertion system that provides fast, highly flexible assembly. Easy snap in place installation results in fixed, centered, strain relief with maximum protection in seconds." http://www.lappusa.com/PDF/Page491-SkintopClick-ClickR.pdf ...

SKINTOP® SLM/ SLRM is a durable, liquid tight, easy to assemble strain relief cable gland with Metric threads that is universally suited for all types of machinery & equipment, including automation, motion control, process control and robotics. http://www.lappusa.com/PDF/Page489-SkintopSLM-SLRM.pdf ...

"SKINTOP® SL/ SLR is a durable, liquid tight, easy to assemble strain relief cable gland with PG threads that is universally suited for all types of machinery & equipment, including automation, motion control, process control and robotics." http://www.lappusa.com/PDF/Page488-SkintopSL-SLR.pdf ...

"SKINTOP® SLN/ SLRN is a durable, liquid tight, easy to assemble strain relief cable gland with NPT threads that is universally suited for all types of machinery & equipment, including automation, motion control, process control and robotics." ...

Lapp Group now offers Automotive Primary Wire "for use in engine compartments where high heat resistance is required according to SAE J-1128. It also meets Ford (Mil-85A) and Chrysler (MS-5919)." http://www.lappusa.com/PDF/Page244-245-SingleCoreforAutomotive.pdf ...

"Lapp Group’s offering of PTFE hook-up wire is available in solid or stranded copper. The PTFE insulation is excellent in oils, gasoline, and chemicals. The wire has a low coefficient of friction for easy installation and is selfextinguishing and non-flammable. All versions have a PTFE insulation extruded wall." • Type E = meets NEMA HP3, has a 10 mil insulation thickness and is 600V & 200°C • Type EE = meets NEMA HP3 and has a 15 mil insulation thickness. It has a higher vol...

"• UL Style 1061 is a thin wall UL & CSA wire rated for 300V & 80°C • UL Style 1007/1569 is a UL & CSA approved wire with a 15 mil insulation and rated for 300V & 80°C/105°C • UL Style 1015/1230 has a thicker insulation with UL & CSA approval rated for 600V & 105°C • UL Style 1028 & 1283 have the heaviest wall thickness with UL & CSA approval, rated for 600V & 105°C" http://www.lappusa.com/PDF/Page241-ULHookupWireUL-CSA.pdf <...

"The SVF-K is a compact strain relief connector for flat cable made of polystyrene. The special neoprene bushing provides a flexible seal over a wide range of cable widths." "Body of polystyrene with neoprene bushing" http://www.lappusa.com/PDF/Page237-SVFandSVKCableConnectors.pdf ...

"The SVF is a compact strain relief connector for flat cable made of nickel-plated brass. The special neoprene bushing provides a flexible seal over a wide range of cable widths." "Body of nickel-plated brass with neoprene bushing" http://www.lappusa.com/PDF/Page237-SVFandSVKCableConnectors.pdf ...

ÖLFLEX® CRANE F is a flexible, oil resistant, neoprene jacketed festoon, power and control cable. "For indoor and outdoor use on overhead crane and material handling systems." http://www.lappusa.com/PDF/Page236-OLFLEXCraneF.pdf ...

ÖLFLEX® CRANE 2S is a PVC insulated and jacketed cable for connecting control panels. This cable contains two special torsion-free steel supporting elements integrated in parallel on both sides of the outer jacket, which absorbs the resulting tensile load during operation. The tensile strength is 2100 N and allows free carrying installation up to 150 meters (492 feet) in length. "Suitable for outdoor use and as self-supporting shaft cable. This is not an elevator cable." http://...

ÖLFLEX® LIFT F is a flat control cable with a special cold resistant PVC insulation and black PVC jacket. According to VDE definition, this cable can also be used as an elevator control cable up to 35 meters (115 feet) suspension length with a maximum travel speed of 1.6m/sec. Mainly suited for indoor use. "For use on Conveying systems, Hoists, Cable trolleys and as supply line for moving machine parts." http://www.lappusa.com/PDF/Page234-OLFLEXLiftF.pdf ...

ÖLFLEX® FLAT is a UL/CSA approved PVC festoon power and control cable. The specially formulated PVC compound is UV resistant and allows continuous festooning over a wide temperature range for both indoor and outdoor applications. For use on Overhead crane, Material handling systems and as Supply line for moving machine parts. http://www.lappusa.com/PDF/Page233-OLFLEXFlat.pdf ...

ÖLFLEX® POWER IX is a neoprene cordage with UL/CSA SOOW and <HAR> H07RN-F approval. It has an oil, chemical and abrasion resistant jacket and an international color code. ÖLFLEX® POWER IX can be used in European, American, Asian and Canadian cordage applications so one cable does the work of 4. "Power cordage for domestic and exported machinery, Portable tools, Data processing, Control systems, and Commercial appliances" http://www.lappusa.com/PDF/Page213-OLFLEXPowerIX.pdf...

"ÖLFLEX® POWER QUAD II is a PVC cordage with UL/CSA SJTO and <HAR> H05VV-F approval. It has a very oil resistant jacket and an international color code. ÖLFLEX® POWER QUAD II can be used in European, American, Asian and Canadian cordage applications so one cable does the work of 4." "Power cordage for domestic and exported machinery; Portable tools, Data processing, Control systems, and Commercial appliances" http://www.lappusa.com/PDF/Page211-OLFLEXPOWERQUADII.pdf ...

This hook-up wire has international approvals to satisfy the requirements of both North America and Europe. It passes <HAR> H05V-K, <HAR> H07V-K, UL AWM, UL MTW (16 AWG and larger), CSA TEW and CE. Panel and machine wiring for domestic and export usage. Electronic equipment, Medical Equipment, and Wire bundling http://www.lappusa.com/PDF/Page209-HAR-ULStyleHook-upWire.pdf ...

ETHERLINE® Torsion CAT5 Industrial Ethernet cables are designed to provide reliable network communications in Torsion Flexing applications. Tested to over 1 million flex cycles of 180o (Left/Right) over 1 meter, ETHERLINE® Torsion cables meet the most demanding motion requirements. Cable also conforms to the EIA/TIA-568 standard PLC automation networks, Device and Field Level Networking, ProfiNet, Ethernet IP and other Industrial Ethernet Networks http://www.lappusa.com/PDF/Page...

ETHERLINE® CAT6e/7 Industrial Ethernet cables are designed to provide highly reliable network communications in the demanding Industrial and Process Control environment where difficult EMC conditions are pervasive. Conforming to the EIA/TIA-568 standard, ETHERLINE® CAT6e/7 Cables support full duplex high speed communications. PLC and DCS automation networks, Device and Field Level Networking, ProfiNet®, Ethernet IP and other Industrial Ethernet Networks http://www.lappusa.com/PD...

ETHERLINE® CAT5/ CAT 5e Industrial Ethernet cables are designed to provide reliable network communications in the demanding Industrial and Process Control environment where difficult EMC conditions are pervasive. Conforming to the EIA/TIA-568 standard, Etherline CAT5/ CAT 5e Cables support full duplex high speed communications. PLC and DCS automation networks, Device and Field Level Networking, ProfiNet®, Ethernet IP and other Industrial Ethernet Networks http://www.lappusa.com/...

ETHERLINE® CAT5/ CAT5e Industrial Ethernet cables are designed to provide reliable network communications in the demanding Industrial and Process Control environment where difficult EMC conditions are pervasive. Conforming to the EIA/TIA-568 standard, ETHERLINE® CAT5/ CAT5e Cables support half-duplex high speed communications. "PLC and DCS automation networks, Device and Field Level Networking, ProfiNet®, Ethernet IP and other Industrial Ethernet Networks" http://www.lappusa.com...

Lapp Group’s SKINTOP® MS-M BRUSH is now available in NPT sizes from ¾” to 2”. Previously only available in metric sizes, Lapp’s cable gland enables engineers to address EMI control on the factory floor more effectively than other termination methods, su...

The Lapp Group's newly developed ÖLFLEX® VFD XL creates extremely robust power connections between VFDs and motors, delivering mechanical and electrical properties beyond those offered by standard AWG motor cables.   The ÖLFLEX VFD XL has be...

The Lapp Group has developed a new line of rectangular connector housings designed to thrive in corrosive, electrically noisy or mechanically challenging environments. Called EPIC® ULTRA, the new housing features nickel-plated zinc hoods and bases with ...