AC Load Tester functions: Selectable loads of 12, 15 and 20 Amps Measures loaded and unloaded AC Line Voltage Calculates and displays % Voltage Drop and Line Impedance Displays Peak Line Voltage and Frequency Outlet Tester functions: Neutral to Ground Voltage Hot, Neutral and Ground Impedance GFCI Trip Time and Trip Current

HD350: Pitot Tube Anemometer + Differential Manometer Simultaneous display of Pressure, Air Velocity or Air Flow plus Temperature ±0.7252psi range 5 selectable units of pressure measurement Max/Min/Avg recording and Relative time stamp Data Hold and Auto power off functions Large LCD display with backlighting, USB port Zero function for offset correction or measurement Store/Recall up to 99 re...

High/Low Alarms with Vision Alarm Function Fast and accurate measurements at 12" where the two lasers converge with 12:1 field of view Measures up to 950°F (510°C) Automatic blue backlit dual LCD display Red backlit display flashes when reading exceeds High or Low set points Exclusive 150 millisecond instantaneous response for capturing spikes in temperature Max mode captures and holds rapidly changing ...

320 x 240 IR Resolution, Measures Temperature to 1202°F (650°C) Focal Plane Array detector with 320 x 240 pixels infrared resolution (76,800 pixels) Wide temperature range: -4°F to 1202°F (-20°C to 650°C) with 2% accuracy 0.05°C @ 30°C Thermal Sensitivity (N.E.T.D) Manual focus, 4x continuous zoom Built-in laser pointer, 3.5" Touch-Screen LCD display Built-in 3.1 Megapixel visible light digital camera w...

Affordable, Easy-to-Use, Lightweight Thermal Imaging Camera with 60 x 60 IR Resolution Easy-to-use troubleshooting tool, pocket sized and fully automatic Spot measurement mode Temperature range: -4 to 482°F (-20 to 250°C) 60 x 60 pixels image resolution Thermal Sensitivity (N.E.T.D): <0.15°C @ 25°C High accuracy of ±2% helps you find problems faster and easier Large 2.8" color LCD, focus...

Complete with 1200A 12" flexible current clamp probes Datalogging of single and 3-phase/3-wire or 3-phase/4-wire systems (up to 52,428 single phase readings or 17,476 3-phase readings) Flexible clamp probes can be used for wrapping around bus bars and wire bundles Large backlighting LCD displays up to 35 parameters in one screen Clamp-on True RMS power measurements with on-screen Harmonics display Simultaneous d...

Records Relative Humidity, Temperature and Atmospheric Pressure Datalogs up to 10,000 readings with a user programmable sample rate USB interface for easy set-up and data download Selectable Atmospheric Pressure Units: psi, hPa, kPa, and bar Selectable data sampling rate from 1 minute to 18 hours User-programmable Min/Max alarm thresholds Manual and Programmable start modes Status Indicatio...

Records data on an SD card in Excel® format Checks for Carbon Dioxide (CO 2 ) concentrations Maintenance free dual wavelength NDIR (non-dispersive infrared) CO 2 sensor Triple LCD simultaneously displays CO 2 , Temperature and Relative Humidity Measurement ranges: CO 2 - 0 to 4,000ppm; Temperature - 32 to 122°F (0 to 50°C); Humidity - 10 to 90%RH Datalogger stores readings on an...

Inspection Camera with 5.5mm Flexible, 60° FOV, Macro Probe (1m) Includes 5.5mm flexible, 60° FOV, macro probe (1m) 5.7" color LCD TFT with high definition 640 x 480 resolution Compact, high-resolution water-proof camera probe Camera head with four built-in bright LED lamps with dimmer to illuminate viewed object Glare-free close-up field of view SD memory card included to store more than 14,600 images<...

Extech Instruments, a major supplier of test and measurement equipment for the industrial marketplace, announces its TK430-IR Industrial Troubleshooting Kit. Extech has assembled this convenient, portable system to address all the electrical testing needs for installation and repair of electrical systems, HVAC equipment and large appliances. Extech’s TK430-IR Industrial Troubleshooting Kit comes complete with an EX430 True...

Based on patented technology, the HD300 provides simultaneous display of Air Flow in CFM/CMM or Air Velocity plus Ambient Temperature. Housed in a protective, hard carrying case, it can measure remote surface temperatures to 932°F (500°C) with 30:1 distance-to-spot ratio and laser pointer. ...

Assembled to address all electrical testing needs for the installation and repair of electrical systems, HVAC equipment and large appliances. Includes EX430 multimeter, MA200 clamp meter, 40130 voltage detector, CAT III-1000V test leads, Type K thermocouple bead probe, and Type K banana input adaptor. ...

Provides high accuracy datalogging of up to 20,000 records and captures up to 10 readings/sec when connected to a PC. Featuring Heavy Duty rugged double molded housing, the HD600 meets ANSI and IEC61672-1 Type 2 standards. USB port includes software. ...

This 3-in-1 combination meter combines the functions of a Precision Humidity Meter with a patented built-in Infrared Thermometer for non-contact temperature measurement to 932°F (500°C) with 30:1 distance to target ratio, in addition to a built-in Type K Thermometer that provides contact temperature measurements. ...

Easy-to-use and maintain, the EX830 is ergonomically designed with a double molded case for simple one handed operation. Features large 4000 count LCD display with backlighting, allowing the user to see reading in dim light. CE certified with a safety rating of CAT III-600V, ensuring a lasting product of the highest quality. ...

CAT IV rated meter features rugged double-molded waterproof and extra tough drop-proof housing. Other features include Dual Frequency, bright main display, Bargraph, True RMS, Min/Max, Relative, Hold and Temperature. Comes complete with double molded test leads, magnetic hanging strap, Type K bead wire temperature probe, carrying case, and batter...

Compact thermometer measures temperature from -58 to 1200°F (-50 to 650°C) with 0.1° resolution up to 199.9°. Adjustable High/Low setpoints with audible alarm alerts user when temperature exceeds the programmed setpoints. Adjustable emissivity for better accuracy on different surfaces. ...

Extech Instruments announces the release of its affordable new DT300 compact, pro-grade laser distance meter. The Extech DT300 makes it easy to measure distances, compute area and volume, and measure angles. Users can quickly take measurements with one-button, point-and-shoot convenience, saving time and dollars resulting from estimating errors.   Even in glare conditions, the DT300’s bright laser and large, backlit, 3-line display make it easy to measure targets up to 164’ (50m...

Extech Instruments announces the introduction of the new PRC line of process calibrators to test transmitters, transducers, indicators, sensors and other industrial process components. The four new meters -- PRC10, 15, 20 and 30 -- offer plant and elect...

Extech Instruments announces the release of the new industrial app, “EX845 METERLiNK for Android.” The new app allows electrical contractors and plant maintenance professionals who use Extech’s EX845 clamp meter to remotely view and display reading...

Extech Instruments announce the new MG300, a true RMS multimeter with built-in insulation resistance tester and the added safety of wireless datastreaming for remote monitoring and datalogging. By adding insulation testing capabilities to the ubiquitou...